The Farmer's Wife Quilt Along Rotary Instructions for Blocks # 3 and # 4
#1
Super Member
Thread Starter
Join Date: Apr 2010
Location: Central Jersey & Calabash,NC
Posts: 4,024
Block #3
1. light- Template # 4 Cut 1- 2 1/2 " square
2. light- Template # 5 Cut 1 - 3 1/2 " square
3. dark- Templates # 6 and 6 R Cut 1 strip 2" x 7" long
Use templates to cut pieces.
4. dark- Template #7 cut 1- 2 3/8" square. Cut in half diagonally.
5. light- Template # 7 cut 1- 2 3/8" square cut in half diagonally
OPTION: Instead of above, you may choose to cut 2- 2" squares -place them on the correct side of the light rectangle.
sew on the center line of the square diagonally, press flip the little to the corner, press again then trim away the corner underneath. Just make sure the sewing line is going in the correct direction
6. light- Template # 8 cut 1- 3 1/7/8" square, cut in half diagonally, use only one.
7. light- Template # 9 cut 2 2" x 3 1/2 " rectangle.
8. dark- Template # 10 cut one- 7/8" x 7 7/8" strip on the bias.
Option: Use curved template for applique.
Block # 4
1. light- Template # 11 cut one strip 1-1/2" x 14" long
2. med- Template # 11 cut one strip 1-1/2" x 14" long
3. dark- Template # 11 cut one strip 1-1/2" x 14" long
Sew in the order of light,med,dark- the strips lengthwise,
press to the dark side then cut into 3-1/2" pieces.
I have given the length of 14 inches so there will be room for trimming.
1. light- Template # 4 Cut 1- 2 1/2 " square
2. light- Template # 5 Cut 1 - 3 1/2 " square
3. dark- Templates # 6 and 6 R Cut 1 strip 2" x 7" long
Use templates to cut pieces.
4. dark- Template #7 cut 1- 2 3/8" square. Cut in half diagonally.
5. light- Template # 7 cut 1- 2 3/8" square cut in half diagonally
OPTION: Instead of above, you may choose to cut 2- 2" squares -place them on the correct side of the light rectangle.
sew on the center line of the square diagonally, press flip the little to the corner, press again then trim away the corner underneath. Just make sure the sewing line is going in the correct direction
6. light- Template # 8 cut 1- 3 1/7/8" square, cut in half diagonally, use only one.
7. light- Template # 9 cut 2 2" x 3 1/2 " rectangle.
8. dark- Template # 10 cut one- 7/8" x 7 7/8" strip on the bias.
Option: Use curved template for applique.
Block # 4
1. light- Template # 11 cut one strip 1-1/2" x 14" long
2. med- Template # 11 cut one strip 1-1/2" x 14" long
3. dark- Template # 11 cut one strip 1-1/2" x 14" long
Sew in the order of light,med,dark- the strips lengthwise,
press to the dark side then cut into 3-1/2" pieces.
I have given the length of 14 inches so there will be room for trimming.
#8
Super Member
Thread Starter
Join Date: Apr 2010
Location: Central Jersey & Calabash,NC
Posts: 4,024
Originally Posted by brookemarie19
Sorry, but I'm a little confused for template #8 in block number 3. What am I supposed to cut it at?
Brooke
Brooke
Please note that you can increase these sizes by a 1/16 of an inch. I find it just makes the finished piece more true to size after the joining, pressing, wobbly seams, etc. You can always trim. you can't add a piece. Anne
#9
Super Member
Thread Starter
Join Date: Apr 2010
Location: Central Jersey & Calabash,NC
Posts: 4,024
]Block #3
1. light- Template # 4 Cut 1- 2 1/2 " square
2. light- Template # 5 Cut 1 - 3 1/2 " square
3. dark- Templates # 6 and 6 R Cut 1 strip 2" x 7" long
Use templates to cut pieces.
4. dark- Template #7 cut 1- 2 3/8" square. Cut in half diagonally.
5. light- Template # 7 cut 1- 2 3/8" square cut in half diagonally
OPTION: Instead of above, you may choose to cut 2- 2" squares -place them on the correct side of the light rectangle.
sew on the center line of the square diagonally, press flip the little to the corner, press again then trim away the corner underneath. Just make sure the sewing line is going in the correct direction
6. light- Template # 8 cut 1- 3 1/7/8" square, cut in half diagonally, use only one.
7. light- Template # 9 cut 2 2" x 3 1/2 " rectangle.
8. dark- Template # 10 cut one- 7/8" x 7 7/8" strip on the bias.
Option: Use curved template for applique.
Block # 4
Please note: the length should be 14 1/2" long
1. light- Template # 11 cut one strip 1-1/2" x 14" long
2. med- Template # 11 cut one strip 1-1/2" x 14" long
3. dark- Template # 11 cut one strip 1-1/2" x 14" long
Sew in the order of light,med,dark- the strips lengthwise,
press to the dark side then cut into 3-1/2" pieces.
I have given the length of 14 inches so there will be room for trimming.[/quote]
1. light- Template # 4 Cut 1- 2 1/2 " square
2. light- Template # 5 Cut 1 - 3 1/2 " square
3. dark- Templates # 6 and 6 R Cut 1 strip 2" x 7" long
Use templates to cut pieces.
4. dark- Template #7 cut 1- 2 3/8" square. Cut in half diagonally.
5. light- Template # 7 cut 1- 2 3/8" square cut in half diagonally
OPTION: Instead of above, you may choose to cut 2- 2" squares -place them on the correct side of the light rectangle.
sew on the center line of the square diagonally, press flip the little to the corner, press again then trim away the corner underneath. Just make sure the sewing line is going in the correct direction
6. light- Template # 8 cut 1- 3 1/7/8" square, cut in half diagonally, use only one.
7. light- Template # 9 cut 2 2" x 3 1/2 " rectangle.
8. dark- Template # 10 cut one- 7/8" x 7 7/8" strip on the bias.
Option: Use curved template for applique.
Block # 4
Please note: the length should be 14 1/2" long
1. light- Template # 11 cut one strip 1-1/2" x 14" long
2. med- Template # 11 cut one strip 1-1/2" x 14" long
3. dark- Template # 11 cut one strip 1-1/2" x 14" long
Sew in the order of light,med,dark- the strips lengthwise,
press to the dark side then cut into 3-1/2" pieces.
I have given the length of 14 inches so there will be room for trimming.[/quote]
Thread
Thread Starter
Forum
Replies
Last Post
Honchey
Blocks of the Month and Week
1
11-09-2010 08:42 AM
Honchey
Blocks of the Month and Week
6
10-27-2010 06:54 AM
Honchey
Blocks of the Month and Week
0
10-26-2010 06:20 PM
Honchey
Blocks of the Month and Week
0
10-12-2010 06:03 PM
Honchey
Blocks of the Month and Week
0
09-28-2010 06:21 PM