Help! I need a creative change/fix...
#11
Originally Posted by MTS
Don't cut anything. Maybe you can do something a bit different with it.
Can we see a pic?
Can we see a pic?
#12
Super Member
Join Date: Dec 2010
Location: New York City/Manhattan
Posts: 1,316
don't cut. DON"T CUT! (yelling for you to hear!). do what early pioneer women did, make do. no one says it must be square. or if you want square, add borders to only 2 sides at some point, to even things out. Even if you just play and add borders as the idea occurs to you it will be lovely and no one will be the wiser that it was meant as a large lap quilt.
#15
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,660
Am I understanding this correctly?
They (your kin) want you to add on to an already completed quilt?
Many things are possible, but that sounds like a major PIDA project to me.
I think it would be easier to start from scratch - and have relatives help pick out and pay for the materials.
Or do they just want you to add on to a top? Which would be a lot more doable.
They (your kin) want you to add on to an already completed quilt?
Many things are possible, but that sounds like a major PIDA project to me.
I think it would be easier to start from scratch - and have relatives help pick out and pay for the materials.
Or do they just want you to add on to a top? Which would be a lot more doable.
#16
Banned
Join Date: Jan 2011
Posts: 887
Just suggestion - I have one I ,ade for queen bed that is now on king. Didn't fit but was completely finished so I tried an alternate way. I went and bought a very inexpensive cotton thermal blanket in king then I turned the queen sidewatys and laid across the foot of the bed. Because it was sideways there was plenty of drop and it came over half way up the bed then you see the pretty white under blanket and throw pillows. Worked out lovely.
#17
Originally Posted by bearisgray
Am I understanding this correctly?
They (your kin) want you to add on to an already completed quilt?
Many things are possible, but that sounds like a major PIDA project to me.
I think it would be easier to start from scratch - and have relatives help pick out and pay for the materials.
Or do they just want you to add on to a top? Which would be a lot more doable.
They (your kin) want you to add on to an already completed quilt?
Many things are possible, but that sounds like a major PIDA project to me.
I think it would be easier to start from scratch - and have relatives help pick out and pay for the materials.
Or do they just want you to add on to a top? Which would be a lot more doable.
So I said I would make the turquoise one larger to fit their bed since it matches their room perfect. Just trying to figure out how to add to it without it looking like an afterthought. But it's a simple YBR pattern so didn't know if I could just throw a boarder around it and it not look " like a cheesy afterthought"
#18
Banned
Join Date: Nov 2010
Posts: 4,134
Sorry, I don't know what happened to that post yesterday.
Now, if I can remember what I wrote. :roll:
On a king size bed, your 50x60 is going to be like a medallion in the center. You'll still need the +/- 17" to 24" borders to have an 8" drop all around. They might want more. Is it a high bed, platform, waterbed?
I don't think you should/need to trim the size you have. Leave it as a rectangle, and have the rectangle (long) go across the bed. I like that it's not square; it adds a bit of interest.
I'm a big fan of wide borders, but I think the ones here need to be broken up at bit.
You've got such an eclectic mix of fabric that you should be able to find a few more to mix right in.
Since you're sending it out to be quilted, your LA can really go to town in those borders.
Ignore the coloring in the picture (I was lazy). This layout is 96" square. It's just to give you an idea of proportion, and how the different widths look.
The green outline in the 2nd pic shows what would show, +/-, on the TOP of the king size bed (around 80" square). The rest would be the drop.
The first wide border is 7.5", then 3" for the pieced.
The next wide border is 7.5 for the sides, and 5" for the top and bottom.
Then another 3" pieced on the top and bottom, followed by a 5" border.
And whatever breaks up the wide border pieces doesn't have to be too complex because the YBR itself isn't really a complex. I just did a simple rail fence block as this would allow you to easily incorporate the new fabrics with your scraps left over from the YBR. You could do some Flying Geese or QST blocks. But since it's only a 3" border, it's your call on how many blocks you want to make.
@bearisgray-
Just an FYI - even if it had been quilted (and not just tied), the borders could have been easily added using the QAYG technique. I've done it many times - some on purpose and, sadly, some....because *#&( happens. :roll:
Now, if I can remember what I wrote. :roll:
On a king size bed, your 50x60 is going to be like a medallion in the center. You'll still need the +/- 17" to 24" borders to have an 8" drop all around. They might want more. Is it a high bed, platform, waterbed?
I don't think you should/need to trim the size you have. Leave it as a rectangle, and have the rectangle (long) go across the bed. I like that it's not square; it adds a bit of interest.
I'm a big fan of wide borders, but I think the ones here need to be broken up at bit.
You've got such an eclectic mix of fabric that you should be able to find a few more to mix right in.
Since you're sending it out to be quilted, your LA can really go to town in those borders.
Ignore the coloring in the picture (I was lazy). This layout is 96" square. It's just to give you an idea of proportion, and how the different widths look.
The green outline in the 2nd pic shows what would show, +/-, on the TOP of the king size bed (around 80" square). The rest would be the drop.
The first wide border is 7.5", then 3" for the pieced.
The next wide border is 7.5 for the sides, and 5" for the top and bottom.
Then another 3" pieced on the top and bottom, followed by a 5" border.
And whatever breaks up the wide border pieces doesn't have to be too complex because the YBR itself isn't really a complex. I just did a simple rail fence block as this would allow you to easily incorporate the new fabrics with your scraps left over from the YBR. You could do some Flying Geese or QST blocks. But since it's only a 3" border, it's your call on how many blocks you want to make.
@bearisgray-
Just an FYI - even if it had been quilted (and not just tied), the borders could have been easily added using the QAYG technique. I've done it many times - some on purpose and, sadly, some....because *#&( happens. :roll:
#20
Banned
Join Date: Nov 2010
Posts: 4,134
Originally Posted by bearisgray
Would one need to remove the binding? or just cut it off?
Or is that one of those "it depends" situations?
Or is that one of those "it depends" situations?
The reason I say most of the time is that there is a QAYG method that brings the backing to the front of the block (not using sashing strips). So if you were were going to add the borders using that method, then you could probably leave the binding on. Wouldn't be the best move aesthetically (???), but it wouldn't affect the stability of the quilt.
DebWatkins wrote a tutorial on this method:
http://www.quiltingboard.com/t-52698-1.htm
Thread
Thread Starter
Forum
Replies
Last Post
Favorite Fabrics
General Chit-Chat (non-quilting talk)
44
10-10-2013 07:46 AM