$200 to "service" my sewing machine!
#71
Junior Member
Join Date: May 2010
Location: Delaware
Posts: 210
In De, that seems pretty reasonable.
#72
Super Member
Join Date: Jul 2010
Location: Glenmoore, PA
Posts: 7,941
Originally Posted by Nancy11442
Originally Posted by joan_quilts
Ok, I have a Husqvarna Quilt Desinger I. It wasn't working quite right last week, so I took it to a sewing machine dealer/fabric store.
They did have to replace a few parts, that was $73. Ok, I didn't know I had a problem with those parts, but hey, they are liscensed to work on these machines.
I got the bill yesterday when I picked up my machine, and it was $200 just to "service" it! That means the yearly cleaning! The receipt said clean and labor, oiling internal parts and checking the belts.
I think that is way too much! It took them less than a day to have it ready for me to pick up. If I would have known it was going to cost $200 for the servicing, I would have never taken it to be fixed.
I am over reacting or does this seem kind of a high price to you? Thanks for any replies. I just needed to vent.
They did have to replace a few parts, that was $73. Ok, I didn't know I had a problem with those parts, but hey, they are liscensed to work on these machines.
I got the bill yesterday when I picked up my machine, and it was $200 just to "service" it! That means the yearly cleaning! The receipt said clean and labor, oiling internal parts and checking the belts.
I think that is way too much! It took them less than a day to have it ready for me to pick up. If I would have known it was going to cost $200 for the servicing, I would have never taken it to be fixed.
I am over reacting or does this seem kind of a high price to you? Thanks for any replies. I just needed to vent.
#73
Super Member
Join Date: Jul 2010
Location: Glenmoore, PA
Posts: 7,941
Originally Posted by jgriinke
Ok, I just have to chime in here. I was a hairdresser for 33 years and now I am working with my husband in his snowmobile repair business. Having told you that - I now have to stand up for small business owners. Like someone else said, you are paying for what they know.
Do you have the time and know how to fix your machine?
Do you have the parts in stock?
Do you have to pay the insurance on the building and liabiliy insurance in case someone should slip and fall(God forbid)?
When you take a machine in for repair, any kind of machine, yes, they give you a rough estimate, but if it is within a resonable amount over, they fix it. Do you know how long it takes to try and get hold of someone to get the OK to go ahead and fix something? Many times, it could be fixed and ready to go while waiting on a return call from the owner. Then they say, go ahead and fix it...A major waste of time. What I have learned to do is to ask what the top dollar for repairs is that they are willing to pay. Many times it is way under that, sometimes a little over.
I guess I should stop now, I feel like I'm on a soap box and should get off.
But, just remember that us small business owners don't get the big breaks that big corps do. We don't get the big discounts when ordering parts because we can only order what we think we will need.
Sorry if I am going on and on about this, but we all need to be informed shoppers. I don't mean to upset anyone and I hoped I didn't.
Do you have the time and know how to fix your machine?
Do you have the parts in stock?
Do you have to pay the insurance on the building and liabiliy insurance in case someone should slip and fall(God forbid)?
When you take a machine in for repair, any kind of machine, yes, they give you a rough estimate, but if it is within a resonable amount over, they fix it. Do you know how long it takes to try and get hold of someone to get the OK to go ahead and fix something? Many times, it could be fixed and ready to go while waiting on a return call from the owner. Then they say, go ahead and fix it...A major waste of time. What I have learned to do is to ask what the top dollar for repairs is that they are willing to pay. Many times it is way under that, sometimes a little over.
I guess I should stop now, I feel like I'm on a soap box and should get off.
But, just remember that us small business owners don't get the big breaks that big corps do. We don't get the big discounts when ordering parts because we can only order what we think we will need.
Sorry if I am going on and on about this, but we all need to be informed shoppers. I don't mean to upset anyone and I hoped I didn't.
#74
Junior Member
Join Date: May 2010
Location: Delaware
Posts: 210
Well a yearly cleaning and check up usually runs 125.00--the other work all for 200.00 seems ok to me,
#75
Junior Member
Join Date: May 2010
Location: Delaware
Posts: 210
Well a yearly cleaning and check up usually runs 125.00--the other work all for 200.00 seems ok to me,
#76
Super Member
Join Date: Jun 2010
Location: Chapel Hill
Posts: 1,086
I think the labor cost at my LQS is around $80/hour, which I was prepared to pay when I took it in for the first service after purchase (used machine). I was very pleasantly surprised to pay less than $40 at pickup as she charged only for the time she spent on the machine - I had finished the "get to know your machine" class the morning I dropped it off so the inside was VERY clean.
Cheers, K
Cheers, K
#77
Super Member
Join Date: Nov 2006
Location: Bar Harbor, ME.
Posts: 2,911
I just had my Janome serviced and thought $80 was a high price. Since they serviced it I've had nothing but problems with the machine, ugh. Can't afford a new machine nor to have it serviced again.
#78
Junior Member
Join Date: Jul 2010
Posts: 187
Originally Posted by jgriinke
Ok, I just have to chime in here. I was a hairdresser for 33 years and now I am working with my husband in his snowmobile repair business. Having told you that - I now have to stand up for small business owners. Like someone else said, you are paying for what they know.
Do you have the time and know how to fix your machine?
Do you have the parts in stock?
Do you have to pay the insurance on the building and liabiliy insurance in case someone should slip and fall(God forbid)?
When you take a machine in for repair, any kind of machine, yes, they give you a rough estimate, but if it is within a resonable amount over, they fix it. Do you know how long it takes to try and get hold of someone to get the OK to go ahead and fix something? Many times, it could be fixed and ready to go while waiting on a return call from the owner. Then they say, go ahead and fix it...A major waste of time. What I have learned to do is to ask what the top dollar for repairs is that they are willing to pay. Many times it is way under that, sometimes a little over.
I guess I should stop now, I feel like I'm on a soap box and should get off.
But, just remember that us small business owners don't get the big breaks that big corps do. We don't get the big discounts when ordering parts because we can only order what we think we will need.
Sorry if I am going on and on about this, but we all need to be informed shoppers. I don't mean to upset anyone and I hoped I didn't.
Do you have the time and know how to fix your machine?
Do you have the parts in stock?
Do you have to pay the insurance on the building and liabiliy insurance in case someone should slip and fall(God forbid)?
When you take a machine in for repair, any kind of machine, yes, they give you a rough estimate, but if it is within a resonable amount over, they fix it. Do you know how long it takes to try and get hold of someone to get the OK to go ahead and fix something? Many times, it could be fixed and ready to go while waiting on a return call from the owner. Then they say, go ahead and fix it...A major waste of time. What I have learned to do is to ask what the top dollar for repairs is that they are willing to pay. Many times it is way under that, sometimes a little over.
I guess I should stop now, I feel like I'm on a soap box and should get off.
But, just remember that us small business owners don't get the big breaks that big corps do. We don't get the big discounts when ordering parts because we can only order what we think we will need.
Sorry if I am going on and on about this, but we all need to be informed shoppers. I don't mean to upset anyone and I hoped I didn't.
#79
I think that it's way too high. Most of the places in our area charge $80 to $90 for a cleaning. My LQS has a "Janome" Club. It's $50.00 a year and I can have my machine cleaned as often as I want, for no cost.
In addition there is no labor charge for fixing it, just parts. I had my needle threader replaced for $1.95.
In addition there is no labor charge for fixing it, just parts. I had my needle threader replaced for $1.95.
#80
I think it depends on where you are and what the average cost of living is in the area.
After all, the same quality hotel room will cost you $75/night in Boise Idaho, and $275/night in San Francisco.
After all, the same quality hotel room will cost you $75/night in Boise Idaho, and $275/night in San Francisco.
Thread
Thread Starter
Forum
Replies
Last Post
caroloto
For Vintage & Antique Machine Enthusiasts
6
03-17-2013 03:20 AM
emmah
For Vintage & Antique Machine Enthusiasts
4
05-09-2011 05:17 PM