1/4" seams, why & how? Please help!
#11
The larger seam allowances for clothing ( 5/8" ) were to help with the fabric pulling loose at the seam when under stress. For quilts, the 1/4" seam allowance is plenty for one main reason - since the three layers are all quilted together all over the quilt, the individual pieces or layers are not under any stress from pulling. When you pull on the edge of a quilt, you pull all three layers at the same time. I've been sewing clothes since I was 9 years old (learned for 4-H) and I know how hard it is to get the 1/4" seam burned into your brain. Practice is your best friend when making quilts - use scraps and make lots of little things like potholders, dog beds, and such. Your 1/4" seams will get much better, as will your piecing and quilting. Then when you make something to show off, you can be assured that you did it right!
#14
Senior Member
Join Date: Jun 2011
Location: Orlando, FL
Posts: 416
Without more information, it is difficult to know what you mean by the 'seam is pulling out'? Do you mean that the stitiches are pulling out at the end of a seam? It could be either your stitch length as mentioned previously or it could be your tension.
To test the tension, sew a seam and leave a thread tail long enough to grasp with your fingers. Try pulling on ONE of the threads - top or bottom. If the thread easily pulls out, then you need to adjust your tension.
To test the tension, sew a seam and leave a thread tail long enough to grasp with your fingers. Try pulling on ONE of the threads - top or bottom. If the thread easily pulls out, then you need to adjust your tension.
#15
Super Member
Join Date: Oct 2011
Location: dallas tx.
Posts: 5,172
Ema, listen to these ladies. They are very knowledgeable and will help you. If you do what they say and practice, you will become very good at this. I'm not trying to be bossy, but I know how hard it is to get a 1/4 inch seam.
#17
I know many, if not most, will not agree with me, BUT since you are a beginner, it is consistency that counts the most. You are probably using patterns and designs that are not too complex. Pick a seam allowance, for example width of the sewing foot on tour machine, and stick with it. If all your seams are consistent, your pieces should fit just fine. As you get more experienced, you will get to the elusive 1/4" seam. Up until recently, I had a machine on which 1/4" seam was impossible due to the position of the feed dogs, and I still made some awesome quilts including Bargellos. Good luck!
#18
Senior Member
Join Date: Feb 2007
Posts: 493
IF your machine is not computerized, I really like these magnetic seam guides. I put it next to the presser foot but sticking out more towards me than even with it. It really helps. Plus, it is important you keep your eye on the material as it feeds into the presser foot rather than watch the needle.
#19
I know many, if not most, will not agree with me, BUT since you are a beginner, it is consistency that counts the most. You are probably using patterns and designs that are not too complex. Pick a seam allowance, for example width of the sewing foot on tour machine, and stick with it. If all your seams are consistent, your pieces should fit just fine. As you get more experienced, you will get to the elusive 1/4" seam. Up until recently, I had a machine on which 1/4" seam was impossible due to the position of the feed dogs, and I still made some awesome quilts including Bargellos. Good luck!
#20
Junior Member
Join Date: Jul 2013
Location: Blue Mountains, Australia.
Posts: 152
I'm a total beginner at using a sewing machine let alone quilting, however, I came across this advice a week or three ago and it's made a huge difference to my accuracy.
Thread
Thread Starter
Forum
Replies
Last Post
bearisgray
General Chit-Chat (non-quilting talk)
65
02-01-2024 09:04 AM