Border help needed
11-23-2020, 02:42 PM
#11
Senior Member
Join Date: Apr 2019
Posts: 846
11-23-2020, 05:16 PM
#13
Super Member
Join Date: Aug 2011
Location: kansas
Posts: 6,407
I don't think it will be a problem with regular borders, but if you don't want to cut through the medallions you'd either need to miter corners (I've only done about 3 quilts that way--first was huge K size and worked perfectly--other 2 were a challenge!) or use a corner stone or other block at the corner. I'd do the cornerstone personally.
11-23-2020, 05:43 PM
#14
Super Member
Join Date: Aug 2017
Location: Ohio
Posts: 1,726
11-24-2020, 04:30 AM
#15
Super Member
Join Date: Jul 2013
Location: South Dakota
Posts: 8,147
I've worked with a lot of border fabric and larger prints and done a lot of fussy cutting to get it right, but when I looked at the pictures, I was like many others - the print is small enough I'd not give it a thought.
Now, if the print was large enough so you'd only get one full medallion row and then partials on the edges, I'd do something different.
Now, if the print was large enough so you'd only get one full medallion row and then partials on the edges, I'd do something different.
11-24-2020, 09:16 PM
#19
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,798
It's bothering you now ... so ... you probably want to face the issue and deal with it now. Otherwise, you know it will bug you forever!!!! 
Here's a way with out mitres that might work out for you. Cut the sides lengthwise on the fabric. Then the ends crosswise on the fabric. (Or sides crosswise and ends lengthwise). Your fabric is directional, so you will have the trick of making sure you have the design going the right way.
The next challenge you may have ..... which to me, may be more bothersome than the corners looking askew. That would be if you have to join the fabric along the sides/ends as well. Another good lesson in joining pieces and keeping the pattern working.
Honestly, it is all worth the effort! Yes, takes a little time, but the more you do this sort of a thing, the more confident you will become and not see it as such a challenge for future projects.
Just be sure to give yourself some pats on the back for tacking it and how much better it looks.
Good Luck!
Here's a way with out mitres that might work out for you. Cut the sides lengthwise on the fabric. Then the ends crosswise on the fabric. (Or sides crosswise and ends lengthwise). Your fabric is directional, so you will have the trick of making sure you have the design going the right way.
The next challenge you may have ..... which to me, may be more bothersome than the corners looking askew. That would be if you have to join the fabric along the sides/ends as well. Another good lesson in joining pieces and keeping the pattern working.
Honestly, it is all worth the effort! Yes, takes a little time, but the more you do this sort of a thing, the more confident you will become and not see it as such a challenge for future projects.
Just be sure to give yourself some pats on the back for tacking it and how much better it looks.
Good Luck!
