Bosal Foam for purses and totes
#1
Junior Member
Thread Starter
Join Date: Aug 2010
Posts: 107
![Default](/images/icons/icon1.gif)
What has been your experience using Bosal In-R-Form Plus? I used it for a patchwork tote and it gives great body.
However, I had a difficult time fusing it to my cotton piecing(no instructions in package for fusing). Also, was wondering if you need to change the tension on the sewing machine because when I sewed front to back, the stitches of the seam were visible when completed. Thank you in advance.
However, I had a difficult time fusing it to my cotton piecing(no instructions in package for fusing). Also, was wondering if you need to change the tension on the sewing machine because when I sewed front to back, the stitches of the seam were visible when completed. Thank you in advance.
#4
Member
Join Date: Dec 2012
Location: Cherokee, Oklahoma
Posts: 21
![Default](/images/icons/icon1.gif)
I made the Improv Tote from MSQC's Mod Block magazine with the In-R-Form Plus and loved it. The directions from that read "Lay the 'second' piece RST on the 'first' and stitch them together through the 2 layers of fabric and foam interfacing. Using only the tip of the iron, tack the fabric open to expose the right sides of both pieces. . . . When entire foam triangle is covered in fabric, give your patchwork a good press to fuse the fabrics to the foam." I didn't have to change the tension on my machine and didn't have an issue with the stitches showing. Hope this helps.
#5
![Default](/images/icons/icon1.gif)
I used it for a bionic gear bag but it wasn't the fusible. I just cut it 1/4" smaller all around and used some SF101 to sort of "tape" it to the edges. It was a lot of work using it. I think my next bionic gearbag will not have it.
#6
Power Poster
Join Date: Mar 2013
Location: Corpus Christi, Tx.
Posts: 16,105
![Default](/images/icons/icon1.gif)
I was thinking about using it for the bionic gear bag also. Then thought it might be too stiff/heavy.
#7
![Default](/images/icons/icon1.gif)
It made the BGB very round. If you do try it, be sure to allow extra on the ends of the cover when you trim. I trimmed 2" on one end and 1.5" on the other but an extra 1/4 or 1/2 inch would have been better.
Thread
Thread Starter
Forum
Replies
Last Post