Can you use a cookie cutter on fabric?
09-16-2014, 08:40 AM
#1
Senior Member
Thread Starter
Join Date: Apr 2009
Location: Lincoln NE
Posts: 865
Can you use a cookie cutter on fabric?
I want to cut several small pieces into butterfly shapes. I do not have a Go Baby, or Accu Quilt or some such thing.
I know basically these work like a past machine, the cutting dies are hidden in foam until they are rolled through the machine, which presses down the foam, exposing the cutting edges of the die. I wonder, could you use a cookie cutter and a rolling pin for a few shapes? Probably the coookie cutter wouldn't hold up to much pressure, so not a good long term answer. And the rolling pin would need be a sacrificial one as it would get marks you may not want when you are trying to roll pastry. But, for a short term project - would this work? Have you tried it?
I know basically these work like a past machine, the cutting dies are hidden in foam until they are rolled through the machine, which presses down the foam, exposing the cutting edges of the die. I wonder, could you use a cookie cutter and a rolling pin for a few shapes? Probably the coookie cutter wouldn't hold up to much pressure, so not a good long term answer. And the rolling pin would need be a sacrificial one as it would get marks you may not want when you are trying to roll pastry. But, for a short term project - would this work? Have you tried it?
09-16-2014, 08:50 AM
#2
Super Member
Join Date: Dec 2010
Posts: 1,232
Perhaps I don't completely understand what you are trying to do, but my cookie cutters are not sharp enought to cut fabric. It would be more tedious, but you could trace around the cutter, and then cut out the shape with scissors.
I want to cut several small pieces into butterfly shapes. I do not have a Go Baby, or Accu Quilt or some such thing.
I know basically these work like a past machine, the cutting dies are hidden in foam until they are rolled through the machine, which presses down the foam, exposing the cutting edges of the die. I wonder, could you use a cookie cutter and a rolling pin for a few shapes? Probably the coookie cutter wouldn't hold up to much pressure, so not a good long term answer. And the rolling pin would need be a sacrificial one as it would get marks you may not want when you are trying to roll pastry. But, for a short term project - would this work? Have you tried it?
I know basically these work like a past machine, the cutting dies are hidden in foam until they are rolled through the machine, which presses down the foam, exposing the cutting edges of the die. I wonder, could you use a cookie cutter and a rolling pin for a few shapes? Probably the coookie cutter wouldn't hold up to much pressure, so not a good long term answer. And the rolling pin would need be a sacrificial one as it would get marks you may not want when you are trying to roll pastry. But, for a short term project - would this work? Have you tried it?
09-16-2014, 08:55 AM
#3
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
I don't think it would work. The cookie cutter edges are sharp, but not sharp the way die cutting edges are sharp. Also, I'm sure the material used for metal cookie cutters is softer than that used in dies. The machines use a mat between the fabric and roller too.
Are you thinking in terms of fusible applique shapes? Your method might work well enough to create indentations in the fabric which you could then cut out with scissors. Otherwise you can draw the shapes on freezer paper, iron the freezer paper to the right side of your fabric, iron fusible to the wrong side of the fabric, then cut with scissors along the freezer paper shapes and peel off the freezer paper.
Are you thinking in terms of fusible applique shapes? Your method might work well enough to create indentations in the fabric which you could then cut out with scissors. Otherwise you can draw the shapes on freezer paper, iron the freezer paper to the right side of your fabric, iron fusible to the wrong side of the fabric, then cut with scissors along the freezer paper shapes and peel off the freezer paper.
09-16-2014, 09:12 AM
#4
Senior Member
Thread Starter
Join Date: Apr 2009
Location: Lincoln NE
Posts: 865
I did forget to mention the mat. I am wanting dozens and dozens (if not hundreds) of small butterfly shapes and just trying to find a way to easily/quickly cut them. I had thought of taking a file to the edges to make them sharper???
09-16-2014, 09:20 AM
#5
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,510
I think the concept is the same as for a die-cutter.
However, the tools you want to use seem don't seem adequate for the task.
A bit like using a plastic picnic knife when what you really need is a razor sharp butcher knife to cut through the gristle.
Try it yourself and see how it works. Maybe your cookie cutters have sharper edges than mine.
However, the tools you want to use seem don't seem adequate for the task.
A bit like using a plastic picnic knife when what you really need is a razor sharp butcher knife to cut through the gristle.
Try it yourself and see how it works. Maybe your cookie cutters have sharper edges than mine.
09-16-2014, 09:24 AM
#6
Power Poster
Join Date: May 2009
Location: NY
Posts: 10,590
09-16-2014, 09:25 AM
#7
Super Member
Join Date: Jun 2011
Location: Illinois
Posts: 9,018
Have you checked on line to see if some company/ shop may sell that shape in precuts? I do remember seeing some precut shapes - hearts, circles... for sale in some catalog......connecting threads,Nancy's notions, etc...?
09-16-2014, 09:27 AM
#8
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,510
Seems like a money and time saving solution if this is a one-time project!!!
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Recipes
5
09-30-2011 05:33 PM
craftybear
Recipes
1
02-12-2011 12:35 PM
