Complaint About Me
#51
I don't know if this makes sense, but my husband is right handed (forced by his father) and is left eye dominant. This made great problems when he hunted and lined up his cross hairs. Aiming a little to the right corrected his problem. Just a suggestion.
#52
Member
Join Date: Sep 2010
Location: Buena Park, CA
Posts: 32
Most machine have a 1/4" foot with a flange on the side to run your fabric up to. You still have to be careful because you can push to fabric up and by the time it get to the needle it is larger than your 1/4". Slowing down help especially in the beginning. On my machine, I am able to move the needle over to make any size seam I need.
#55
Super Member
Join Date: Jul 2010
Posts: 1,256
Originally Posted by Dee
I sew slower and put the foot on edge of fabric, for 1/4 " seam. The needle is ok now since I put a yellow post note in back of needle to thread. Works great.
#56
Senior Member
Join Date: Oct 2009
Location: Morganton, Ga
Posts: 944
The two things that I do to help with seams, use the dual feed feature[even feed foot will work] and watch the edge or marked line. If I worry about what the needle is doing I wander all over the place.
#58
Banned
Join Date: May 2009
Location: Houston, TX
Posts: 7,286
Originally Posted by mhansen6
There are 1/4 inch feet that have a guide blade that works wonderfully. I think most manufacturers make them. I wouldn't be without it now. Sure makes sewing a straight line easier.
#60
Originally Posted by winia
Why is it when I have everything lined up, a foot that has markings on it that I follow rather than the needle I still can't sew in a straight line? What is wrong with me? It's extremely annoying.
1. Did you check to see if there is enough pressure on your fabric. There is an adjustment you can make by tightening a screw at the top (well, that's where mine is -- check your manual) that will cause the presser foot of lean harder on your fabric.
2. If you don't have a quarter-inch foot, do this. Take a pad of small post-its and split the pad so that you have about 1/3 or 1/2 of the pad. Adhere that to the plate of your machine at the place where the edge of you fabric will touch -- 1/4 inch away from the needle for a quarter inch seam, 1/2 inch away from the needle for a half inch seam, etc.
3. When you sew -- DO NOT watch the needle go up and down. Keep your eye on the edge of the fabric to be sure that it is against the foot (in the case of a quarter-inch foot) or against the post-it pad.
4. Slow down. Going too slow is almost as bad, but there's no rush. Sew at a medium speed so you can have control of the fabric.
5. Dont worry about crooked seams. As long as they are in the "general area" most of the time, once pressed -- it'll be OK.
No q. police here.
Thread
Thread Starter
Forum
Replies
Last Post
schnurke
For Vintage & Antique Machine Enthusiasts
13
12-18-2012 08:26 AM