Go Back  Quiltingboard Forums >
  • Main
  • Confused about cutting strips >
  • Confused about cutting strips

  • Confused about cutting strips

    Thread Tools
     
    Old 03-14-2010, 06:48 PM
      #1  
    Senior Member
    Thread Starter
     
    Join Date: Mar 2010
    Location: Buffalo, N.Y.
    Posts: 383
    Default

    Please help a newbie?

    The directions say cut a 2" strip, and a 3" strip, and another 2" strip, then sew them...and I'm supposed to end up with a 6" block??? I don't get it.

    I have been looking at the "Warm Wishes" quilt here:
    http://www.quiltmaker.com/patterns/d...html?idx=5185_

    Could someone explain?
    Thanks
    Beth33 is offline  
    Old 03-14-2010, 06:51 PM
      #2  
    Super Member
     
    Join Date: May 2009
    Location: Central PA
    Posts: 5,573
    Default

    If you take 2 + 3 + 2 inch (total 7in) strips and sew them together with an exact scant 1/4" you will wind up with a 6" width. Then you would cut the length to get 6" blocks unless your strips were 6" long. If you get more or less than 6" when you sew the strips together, you need to readjust your 1/4" and try again. The extra is taken up in your seams.
    nursie76 is offline  
    Old 03-14-2010, 06:55 PM
      #3  
    Super Member
     
    CAROLJ's Avatar
     
    Join Date: Feb 2010
    Location: Rancho Mirage, CA
    Posts: 1,855
    Default

    If you use a 1/4" inch seam you will have used 1" in the seam, thus 6" block. The seam allowance takes off 1/4" from each strip. Hope this helps.
    CAROLJ is offline  
    Old 03-14-2010, 07:41 PM
      #4  
    Power Poster
     
    Join Date: Nov 2007
    Location: SW Iowa
    Posts: 32,855
    Default

    That does make sense. How does it fit into the quilt?
    littlehud is offline  
    Old 03-14-2010, 08:17 PM
      #5  
    Super Member
     
    Join Date: May 2009
    Location: Central PA
    Posts: 5,573
    Default

    Originally Posted by littlehud
    That does make sense. How does it fit into the quilt?
    If you look closely at the pattern, the 3 strip 6" block is every other block. I really like that pattern.
    nursie76 is offline  
    Old 03-14-2010, 08:36 PM
      #6  
    Power Poster
     
    amma's Avatar
     
    Join Date: Jul 2007
    Location: Out searching for some sunshine :-)
    Posts: 58,856
    Default

    Originally Posted by Beth33
    Please help a newbie?

    The directions say cut a 2" strip, and a 3" strip, and another 2" strip, then sew them...and I'm supposed to end up with a 6" block??? I don't get it.

    I have been looking at the "Warm Wishes" quilt here:
    http://www.quiltmaker.com/patterns/d...html?idx=5185_

    Could someone explain?
    Thanks
    when you add the widths of the 3 strips together and subtract off all of the seam allowances your strip will measure 6 1/2" and when you cut this strip into 6 1/2" blocks, take a 1/2" off that for additional seam allowances your block will finish at 6".

    Almost every block in every pattern will be a 1/2" bigger all the way around when "unfinished."
    amma is offline  
    Old 03-15-2010, 03:27 AM
      #7  
    Senior Member
    Thread Starter
     
    Join Date: Mar 2010
    Location: Buffalo, N.Y.
    Posts: 383
    Default

    I still don't understand the math part, but if it makes sense to you guys, then I'll give it a try and see what happens. Have some FQs coming from Ebay that I can play with.....soon I will have "a stash"!!! I'm so excited!

    I feel like a kid in a candy store...I want that fabric, and I want that fabric, etc.

    Thanks again!
    Beth33 is offline  
    Old 03-15-2010, 06:33 AM
      #8  
    Super Member
     
    Join Date: May 2009
    Location: Central PA
    Posts: 5,573
    Default

    Originally Posted by amma
    when you add the widths of the 3 strips together and subtract off all of the seam allowances your strip will measure 6 1/2" and when you cut this strip into 6 1/2" blocks, take a 1/2" off that for additional seam allowances your block will finish at 6".
    Almost every block in every pattern will be a 1/2" bigger all the way around when "unfinished."
    Amma, Just checked the referenced pattern and checked the math, and when the 2 -3-2 strips are joined, they should indeed measure 6 inches, not 6-1/2. The pattern then calls for cutting that strip unit into 6 inch squares. I know that is odd as 6-1/2 unfinished is the norm, but not in this case. Just don't want to get our new quilter even more confused. (Usually it is me that is confused, but for some reason, this morning I can see this issue very clearly...mark it on the calendar! lol)
    nursie76 is offline  
    Old 03-15-2010, 01:52 PM
      #9  
    Senior Member
     
    newestnana's Avatar
     
    Join Date: Nov 2009
    Location: Brick, NJ
    Posts: 819
    Default

    So the unfinished block is 6" but after it's finished it will be 5-1/2", right?
    newestnana is offline  
    Old 03-15-2010, 02:02 PM
      #10  
    Super Member
     
    Oklahoma Suzie's Avatar
     
    Join Date: Aug 2008
    Location: Home town: Rehoboth, MA Now living in OK
    Posts: 7,774
    Default

    It sure makes a cute quilt.
    Oklahoma Suzie is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    ebony
    Main
    3
    04-01-2014 12:12 PM
    wildyard
    Main
    104
    02-10-2011 09:32 AM
    CompulsiveQuilter
    Main
    33
    01-24-2011 04:03 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter