Design Wall
#51
Super Member
Join Date: Jun 2011
Location: near Peoria Illinois
Posts: 1,638
![Default](/images/icons/icon1.gif)
I used yardage of polar fleece. the length of the yardage was my width, the width of the fabric was my length (60"). I rolled slats the size of a yeardstick over the top of the fabric and DH screwed it into the studs. At the bottom, use two widths of the slats and roll to the back and staple. The bottom slats give it body and strength so it doesn't flap around. the extra slat at the bottom gives an angle to the fabric as it hangs, so your blocks won't need as much pinning to stay on. the fleece like flannel hold the fabrics well.
#52
Super Member
Join Date: Jul 2010
Posts: 6,430
![Default](/images/icons/icon1.gif)
Now that I have "studio," I bought fleece and thin lathing. I sewed 2 lengths of fleece together and long enough to go from the ceiling to the baseboards. I stapled the fleece to the lathing all around and then nailed the lathing to the drywall. It is still up after 10 years and is larger than any quilt I may make. I do have to move 2 small tables when I actually put blocks up, but that is not every day. I have really enjoyed it. Hope you find some advice here that you can use for yourself. Happy quilting!
#53
![Default](/images/icons/icon1.gif)
Mine was made from some red cordaroy (sp??), as a stable backing. Then I bought some neutral flannel. I used 2 fabric widths for this.
Then put loops on top and found metal hooks that secure to the framing for drop ceiling tile. Works greak for me. good luck.
Then put loops on top and found metal hooks that secure to the framing for drop ceiling tile. Works greak for me. good luck.
#55
![Default](/images/icons/icon1.gif)
I suggest you use flannel or batting. Fabric will stick to either one. Make it as big as possible!!!
Originally Posted by crazylady54
I am looking to add a design wall to my craft room and have no idea what to do. How big should it be? What should it be made of? I am thinking a curtain rod with a king size white sheet. My husband is thinking a window shade that can be rolled up and down as needed. This wall will be over the byfold closet doors. Any suggestions would be greatly appreciated.
#56
![Default](/images/icons/icon1.gif)
I used the reverse side of a tablecloth, some 3M hooks, and some curtain rings. Put the hooks on the wall over the bifold doors, folded down the necessary amount of the tablecloth and clipped the curtain rings to it, then put the rings over hooks. Completely removable and very useful.
#57
Member
Join Date: May 2010
Location: Millington, TN
Posts: 21
![Default](/images/icons/icon1.gif)
I used a patio dorr size, roll up blind and hot glued flannel on it. I can roll it up if I need to, even with the quilt pieces on it. They stick by themselves unless I have sewn the row together, then I just stick a couple of pins to help hold it.
#58
![Default](/images/icons/icon1.gif)
one day a piece of that insulating styrofoam board flew into our yard and we didn't know where it come from. It was about 4 ft, by 5ft . I covered it with some felt I had and it made a light weight design wall that I can move around easily. didn't cost me a thing. I guess God knew I needed it. Lol.
#59
Super Member
Join Date: Jul 2010
Location: Ohio
Posts: 2,148
![Default](/images/icons/icon1.gif)
Originally Posted by ontheriver
Several people have said they use flannel like the back of a picnic table cloth. Do a search on here, you will find many ideas.
#60
![Default](/images/icons/icon1.gif)
Bought two sheets of 1/2" insulation board at Home Depot. My son nailed them to the wall right through the back side of a flannel backed tablecloth--after cutting out a hole for the electric outlet. Not beautiful but I surely am happy with it. Filled the entire wall.
Thread
Thread Starter
Forum
Replies
Last Post
Chester the bunny
Main
10
10-28-2011 03:13 PM
craftybear
Links and Resources
6
08-22-2011 05:12 PM
craftybear
Main
35
05-20-2011 01:45 PM
craftybear
Links and Resources
5
05-18-2011 07:04 AM