Do you remove pins as you sew or sew over them?
#41
Super Member
Join Date: Nov 2010
Location: Utah
Posts: 2,093
It depends on the pin. Those big "quilting pins" are a big no, no! Fine glass head or patchwork pins, sure, I run over them.
As a sewing machine mechanic, the one thing that I would love to convince people of is to throw those big quilting pins away. When you run over those, you might break a needle. But the real damage is to the hook, down inside the bobbin area. It can put a nasty burr on the tip, or even break the tip right off.
As a sewing machine mechanic, the one thing that I would love to convince people of is to throw those big quilting pins away. When you run over those, you might break a needle. But the real damage is to the hook, down inside the bobbin area. It can put a nasty burr on the tip, or even break the tip right off.
#43
Super Member
Join Date: Jun 2011
Location: Illinois
Posts: 9,018
I'm in this "camp" too. I am really surprised at all the replies " yes, I sew over pins"....... The cost of the machines should definitely convince one to be as careful with them as possible......and if it's a vintage one, all the more reason to treat with care....cannot be replaced! And, even when I did sew clothing...(taught by mother), no sewing over pins.
#45
Senior Member
Join Date: Nov 2011
Location: South East Michigan...at the bottom of the thumb!
Posts: 730
I was taught to sew over the pins when I learned to sew in the 50's but to save my machine possible damage I try to keep the pins away from the sew line. I have run over pins on occasion and have been lucky not to cause any problems. I try to get the thinnest pins in the store!
#46
Junior Member
Join Date: Nov 2011
Location: Central NH
Posts: 180
I sew over pins but I place them with the pin point facing the raw edge of the fabric. The edge of the pin is much thinner. I find the sewing machine needle glides over the pins placed this way. I don't remember the last time I broke a needle with the pins facing the raw edge. Hope this makes sense.
#47
I pin away from the sewing edge. I then can leave the pin in the project when I am sewing. I do not go over the pins. I have had a pin break and fly up into my face and chest. I don't need to have a needle in my body. Thank goodness, I was not injured, but I learned a valuable lesson.
#48
Super Member
Join Date: Nov 2009
Posts: 2,061
It is NEVER a good idea to sew over pins. It can knock your machine out of time and you will get a BIG bill for repairs. Ask me how I know! Not to mention that it will break your needle and send fragments flying which is a danger in itself unless you sew with goggles.
#49
I almost always sew over pins. The sewing foot has the little hinge that lets it adjust as you go over a pin. I taught sewing classes at school for 31 years. Yes, we occasionally broke a needle, but most of the time it kept their fabric where it needed to be for a seam. The key was making sure that the thinnest part of the pin was near the seam (heads out of the way of the foot). I tried to have the area between where the pin went in and came out, be about where the sewing would be. I taught that pins as perpendicular (always a good vocab word) to the seam as they could be would help that. Now when sewing a seam with quilting that has been pinned to keep it matching at an intersection, I only remove the pin if it is too thick. Then only when the needle is right up to the pin.
Thread
Thread Starter
Forum
Replies
Last Post