Easiest and Preferred method for HST's??
#71
Senior Member
Thread Starter
Join Date: Sep 2011
Location: Texas
Posts: 451
![Default](/images/icons/icon1.gif)
GailG, that's they way i was taught too. I think it is best to cut them larger and trim to size. Mine were always just a little skewed and i think it is because i cut the precise size. Trimming down should eliminate some of the out-of-squareness that I had.
#73
![Default](/images/icons/icon1.gif)
Originally Posted by meemersmom
I like Thangles. But, my favorite is my Wonder Cut Ruler...so much you can do with it. http://www.connectingthreads.com/Too...r__D81315.HTML
#74
![Default](/images/icons/icon1.gif)
Triangulations is my favorite!
Every month, I have to make ten blocks for a BOM, and they're made of ten HST's in two sizes.
Triangulations is the only method that works to get consistently sized HST's every time.
I have tried a lot of methods and rulers, but if I have to make more than a few at a time, I will go with Triangulations every time. :)
Every month, I have to make ten blocks for a BOM, and they're made of ten HST's in two sizes.
Triangulations is the only method that works to get consistently sized HST's every time.
I have tried a lot of methods and rulers, but if I have to make more than a few at a time, I will go with Triangulations every time. :)
#75
![Default](/images/icons/icon1.gif)
My method is not the easiest, but it is the preferred, at least for me. If the directions say cut a square to the 8th of an inch I cut to the next quarter, draw a line diagonally down the center, sew 1/4" on either side, cut on drawn line, press open, then square up to desired unfinished size. It will take a lot of time if you have dozens to make but the finished product is perfect and all are uniform and the intersections are much better (& less frustrating!). If no pattern then cut squares 1 inch larger than finished size. When making lots of HSTs, say you need 8 HSTs that finish at 3 inches then put two 8" squares RST, draw diagonal lines from corner to corner, sew 1/4" on either side then cut the squares in half horizontially and vertically then on the drawn lines. (Writing directions is hard)
By the way, I have the Wonder Ruler and have not used it since right after buying it. Maybe it was me but my squares just weren't uniform. Now I just use a standard ruler to square up.
By the way, I have the Wonder Ruler and have not used it since right after buying it. Maybe it was me but my squares just weren't uniform. Now I just use a standard ruler to square up.
#77
Power Poster
Join Date: Oct 2009
Location: Idaho
Posts: 11,375
![Default](/images/icons/icon1.gif)
Originally Posted by Kas
Do the Wondercut HSTs come out the true size when you press, or do you still have to do all that dang trimming? I HATE trimming to size. It takes forever. I just want to sew!
#78
Junior Member
Join Date: Mar 2011
Location: Melbourne, FL
Posts: 261
![Default](/images/icons/icon1.gif)
I paper piece them. Can make 12 2"HSTs with 2-6.5x9.5 rectangles. www.blockcentral.com has Kim Noblin sheets you can print out on your computer. They have the 1 inch grid so you can increase the size if needed. I have to print mine at 105% for them to come out perfect. I find this method very easy and use regular copy paper and it seems to pull from the seam easy.
#79
Power Poster
Join Date: Oct 2009
Location: Idaho
Posts: 11,375
![Default](/images/icons/icon1.gif)
When I teach Beginning Quilting, I usually teach my students 3 or 4 different methods of how to make hst and then they can decide which works best for them. We all have our favorite method(s), it is just a matter of finding it/them. I don't do any of these where I have to remove paper though, that just isn't any fun to me.
Thread
Thread Starter
Forum
Replies
Last Post
gigi712
Links and Resources
17
07-09-2015 04:06 PM