Feedback on FMQ attempt
#13
Originally Posted by Chele
Great tips quilters! You encouraged me to practice my FMQ today. I still stink, but I'm getting better! :wink:
#16
Senior Member
Join Date: Nov 2008
Location: Louisiana
Posts: 317
I just finished my first FMQ quilt-- I hope my experiences might help you. Thank goodness I planned ahead and did a scrappy bargello out of busy 30's prints for my daughter. I named my meandering pattern "Spaghetti" since it meanders and crisscrosses a little. One side is definitely better than the first!
I figured just managing the bulk and getting the stitches done on this first quilt was an accomplishment. Even though I had done many practice pieces on 20" X 20" quilt sandwiches, moving that large quilt was different. Keeping a "nest" of flat quilt around the needle area by folding, bunching, and supporting the rest of the quilt was one skill I needed to master quickly. It's so easy to let the machine get away from you. Having a slick surface under the quilt is really necessary to have rounded curves and not jerky points. The quilt really does need to flow easily. Learning when to stop, with the needle down, to rearrange the quilt, remove any basting, and think about what I would do next improved with practice.
I have two vintage machines that are supposed to be good choices for FMQing, so I found the correct tension settings quickly on both of my machines. But, I realize it might take awhile for me to gain control over really consistant stitch length, especially in the curves. One of my machines makes bigger stitches when I'm stitching from right to left, so I'm learning to slow my hands down there while maintaining the same speed.
I got better as I found my rhythm and learned to relax. I concentrated on making rounded lines and consistant unquilted spaces. I used a finer poly thread for this project in a very neutral natural shade so my stitches wouldn't show as much as the heavier cotton quilting thread. But the thread color was also more difficult to see, so I had to find the right kind of lamp. I figure the puffiness caused by the unquilted spaces after I wash and dry the first time will further minimize my mistakes. (It also helps that my daughter loved the pieced top before I quilted it, so she doesn't seem to notice the wild FMQ).
I'm not sure if stitching in the ditch quilting would have been an easier choice for my first machine quilting project. I'm going to do some SITD to secure the outer edges of the blocks and one of the borders before I begin FMQ for my next quilt. It will have smaller areas of FMQ, not an all over meander, so I'm not sure how it will go.
I figured just managing the bulk and getting the stitches done on this first quilt was an accomplishment. Even though I had done many practice pieces on 20" X 20" quilt sandwiches, moving that large quilt was different. Keeping a "nest" of flat quilt around the needle area by folding, bunching, and supporting the rest of the quilt was one skill I needed to master quickly. It's so easy to let the machine get away from you. Having a slick surface under the quilt is really necessary to have rounded curves and not jerky points. The quilt really does need to flow easily. Learning when to stop, with the needle down, to rearrange the quilt, remove any basting, and think about what I would do next improved with practice.
I have two vintage machines that are supposed to be good choices for FMQing, so I found the correct tension settings quickly on both of my machines. But, I realize it might take awhile for me to gain control over really consistant stitch length, especially in the curves. One of my machines makes bigger stitches when I'm stitching from right to left, so I'm learning to slow my hands down there while maintaining the same speed.
I got better as I found my rhythm and learned to relax. I concentrated on making rounded lines and consistant unquilted spaces. I used a finer poly thread for this project in a very neutral natural shade so my stitches wouldn't show as much as the heavier cotton quilting thread. But the thread color was also more difficult to see, so I had to find the right kind of lamp. I figure the puffiness caused by the unquilted spaces after I wash and dry the first time will further minimize my mistakes. (It also helps that my daughter loved the pieced top before I quilted it, so she doesn't seem to notice the wild FMQ).
I'm not sure if stitching in the ditch quilting would have been an easier choice for my first machine quilting project. I'm going to do some SITD to secure the outer edges of the blocks and one of the borders before I begin FMQ for my next quilt. It will have smaller areas of FMQ, not an all over meander, so I'm not sure how it will go.
#17
Super Member
Join Date: Jan 2008
Location: currently central new jersey
Posts: 8,623
Originally Posted by lfw045
It appears that the bottom tension may need adjusting......I could be wrong.....
nobody was born fmq'ing. keep practicing and you'll get smooth curves. show us your progress, please.
#18
After reading all of the great advice on here, I set my stitch length to its lowest setting and put my machine on full speed. I also played with the tension a bit and slowed down on my curves A LOT.
I'm happy to report that it's looking much better and my curves are now nice and smooth with only a little scalloping on the backside! :lol:
I'm happy to report that it's looking much better and my curves are now nice and smooth with only a little scalloping on the backside! :lol:
#19
Originally Posted by TX_Cutie
I tried FQM for the first time two nights ago and have been practicing. I've never seen any examples in person, only online, so I'm not sure how my stitches should look on the back.
Here are some pictures of my work thus far. Any feedback on how it looks or ideas about what I might be doing wrong would be great.
I'm having trouble getting smooth curves - it looks very choppy.
Here are some pictures of my work thus far. Any feedback on how it looks or ideas about what I might be doing wrong would be great.
I'm having trouble getting smooth curves - it looks very choppy.
#20
Originally Posted by TX_Cutie
After reading all of the great advice on here, I set my stitch length to its lowest setting and put my machine on full speed. I also played with the tension a bit and slowed down on my curves A LOT.
I'm happy to report that it's looking much better and my curves are now nice and smooth with only a little scalloping on the backside! :lol:
I'm happy to report that it's looking much better and my curves are now nice and smooth with only a little scalloping on the backside! :lol:
Great!!! I will love to see a pic of it now.
Now you just need to play with the tension a little more. If you still get the scalloping try changing the thread. I have found at times that some threads are better than others. What machine are you using?
Maria
Thread
Thread Starter
Forum
Replies
Last Post
noveltyjunkie
Links and Resources
16
02-13-2013 06:34 PM