free motion quilting problems
#21
I too started with the oven liner and found it did not help much. I then decided to spring for the
Supreme Slider and it was better but not perfect. I have heard about a silicone spray that you can spray on your machine bed but have never found it. Anybody know where to get it and how it works??
Supreme Slider and it was better but not perfect. I have heard about a silicone spray that you can spray on your machine bed but have never found it. Anybody know where to get it and how it works??
Is it possible that your surface that you're moving the fabric over needs more slide? There is a sewing notion for that called Supreme Slider or the cheaper version an oven liner. I use the latter for that... got 2 for $10ish off Amazon. For better pressure traction I also use gloves with rubberized tips. Without them I'm basically useless. Before I got those I got a hold of some fitted gloves that medical personnel use to see if they worked. I like the quilting gloves better but they too have to fit firmly - I could still slide around inside the small so I went to extra small and all is well with my match stick sized fingers.
#22
Super Member
Join Date: Nov 2011
Location: Central Florida
Posts: 1,472
I don't have Fibro, but I do have lots of arthritis & carpal tunnel. I find it much easier to be seated higher, so that my elbows are even with the top of my table. (My sewing machine is set down into a table). The other thing to remember is that the part of the quilt you aren't working on needs to be supported with perhaps another table to make an L shape unit. Lessen the tension on your presser foot and have fun! It is really liberating!! :-)
#23
Junior Member
Join Date: May 2013
Location: Franklin, TX
Posts: 124
What a great idea! QUOTE=meyert;7872991]I have found that I really like using the sponges that have a pot scrubber side to them. The scrubby side on the fabric really grips the fabric great. The sponge is soft to hold on to - and my hands don't get a sweaty like when I wear the gloves
[ATTACH=CONFIG]577436[/ATTACH][/QUOTE]
[ATTACH=CONFIG]577436[/ATTACH][/QUOTE]
#24
Member
Join Date: Apr 2010
Location: Newfoundland, Canada
Posts: 32
Wildyard, an easy temporary solution to not having an extension table is to stack books around your machine the same height as your sewing machine bed. Tape them together. If you dont want to get tape on the books, wrap each bundle in paper first. On top of the machine bed and the extesion table made of books, tape down a plastic report cover or anything a bit slippery with a hole cut out around the needle area. Make sure that your quilt is fuller supported everwhere and not hanging down off your table. Cheap, easy solution to try. Good luck!
#25
Super Member
Join Date: Jul 2014
Location: Illinois
Posts: 2,140
So much great information! I think my two biggest problems are that my machine is not flush and sits above the table surface so everything is always uphill, and working with the wrong foot pressure and foot. I don't even have an extension table so my actual surface area is very small and I don't see that changing. Guess it's back to straight line quilting for me. I really don't mind so much, I get a lot of quilts done that way and people seem to like it ok.
My favorite saying is Bloom Where You Are Planted, and I seem to be planted smack in the middle of straight line quilting! LOL
My favorite saying is Bloom Where You Are Planted, and I seem to be planted smack in the middle of straight line quilting! LOL
Depending on what brand of machine you have, the darning feet may not be expensive. For my old Singer, I paid $10 for it. Of course, my Bernina darning foot was quite pricey.
I have not had a control to adjust the pressure foot pressure on any of my machines, so while that is a great feature, it isn't necessary to FMQ.
Of course, there are a lot of beautiful designs that can be done with straight line quilting ... just wanted you to know you have options without investing a huge amount of money (and, for that matter, even my "cabinet" is an IKEA hack of their $60 INGO dining table -- so I went from $15 worth of chocolate boxes to a $60 table & have enjoyed FMQ'ing every step of the way!).
#26
Member
Join Date: Mar 2012
Posts: 36
Just another suggestion. When I was first trying free motion quilting and my machine was higher than table, I went to
store that sells thick foam board like used for insulation in homes. Measure the height of your machine and look for foam that will give you an even working surface. I needed two layers to get right height. For ease of movement t covered foam board with heavy clear plastic. Most foam board comes 4x 8' and can easily be cut to size of your table or some places that sell it will cut it for you. I also used a chair I can raise higher so as to not have strain on shoulders and upper arms.
You have already received many suggestions, so hope you will try some or decide if you feel they would help and have success i doing free motion quilting
store that sells thick foam board like used for insulation in homes. Measure the height of your machine and look for foam that will give you an even working surface. I needed two layers to get right height. For ease of movement t covered foam board with heavy clear plastic. Most foam board comes 4x 8' and can easily be cut to size of your table or some places that sell it will cut it for you. I also used a chair I can raise higher so as to not have strain on shoulders and upper arms.
You have already received many suggestions, so hope you will try some or decide if you feel they would help and have success i doing free motion quilting
#27
Super Member
Join Date: Jan 2015
Posts: 2,867
When I quilted on my dining room table, I used books covered in vinyl sold by the yard. Just cut a hole for the presser foot area. Then I tried some styrofoam packing. I do find it easier to be higher - a kitchen stool works. I do have fibro and several arthritises. I use a FMQ foot. Mine came from aprils1930shoppe as I quilt on a slant needle Singer 301, which is now set in a table (Kenmore for $5 from Salvation Army). I think the foot is your problem. A regular foot would put continual pressure on your quilt and inhibit moving it easily. For me gloves are too hot. I use scraps of grippy underlayment sold for throw rugs.
#29
Super Member
Join Date: Mar 2007
Location: Lansing, MI
Posts: 1,038
I don't have fibro, so I don't really know what you are dealing with. Nor do I have any direct relevance towards what you experience. Just hoping, that perhaps this info may help you a little.
I used finger cots when I first started FMQing and didn't like them for the same reason.
However, I found out that there are different sizes, and when I got a better fit, I was more impressed.
What I didn't like was how fast they wore out, especially if I was trying to move a pin.
Also, I was surprised how much my fingers would sweat in them.
Machingers became my best friend ... The stretch of them, let them fit relatively tight, but do not compress. If find them quite comfortable to work with. My hands don't sweat in them, but if my hands are a bit cold, they even give a little extra warmth. Bonus too, I often feel like they give a bit of a massage.
Good Luck!
I used finger cots when I first started FMQing and didn't like them for the same reason.
However, I found out that there are different sizes, and when I got a better fit, I was more impressed.
What I didn't like was how fast they wore out, especially if I was trying to move a pin.
Also, I was surprised how much my fingers would sweat in them.
Machingers became my best friend ... The stretch of them, let them fit relatively tight, but do not compress. If find them quite comfortable to work with. My hands don't sweat in them, but if my hands are a bit cold, they even give a little extra warmth. Bonus too, I often feel like they give a bit of a massage.
Good Luck!
#30
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,827
When buying, be sure you get them small enough .... so that they are like a second skin, and not sloppy.
I was shocked, that "small" was for me ... gee, I have never had small in anything!!
That was a nice ego boost!!!!
Thread
Thread Starter
Forum
Replies
Last Post
anniehall
Main
12
08-08-2018 09:42 AM
twinstitches
Main
65
07-18-2010 02:28 PM