Go Back  Quiltingboard Forums >
  • Main
  • ???? for Hand Quilters >
  • ???? for Hand Quilters

  • ???? for Hand Quilters

    Thread Tools
     
    Old 09-22-2011, 11:13 AM
      #11  
    Senior Member
    Thread Starter
     
    Join Date: May 2010
    Location: Stanley NC
    Posts: 981
    Default

    Originally Posted by purrfectquilts
    Yes, you can most definitely use templates or stencils for designs. I keep a book of designs for reference and have a standard set of stencils in the common sizes.

    Check your library for a book called Amish Quilt Designs (full size) by Gwen Marston and Joe Cunningham. This is a good basic reference to keep on your shelf. You can use a copy machine to make the designs larger or smaller.

    Start with a sz 7 between needle and practice until your stitches are even then move up to a sz 9 or sz 11. Knot your thread on the end you cut from the spool and never use a piece longer than 16 or 18 inches at a time. Use bees wax on your thread or use a coated quilting thread. Use a slightly thicker weight thread than you would in a sewing machine.
    Thanks for your suggestions. I think I'm using a 9 or 10 (not sure) and it seems to be working fine when I'm not going over the bulky seams. I think I'll use a template when I get ready to quilt the borders.
    teddysmom is offline  
    Old 09-22-2011, 11:25 AM
      #12  
    Senior Member
     
    CarrieC's Avatar
     
    Join Date: Sep 2011
    Location: Virginia
    Posts: 811
    Default

    My only hint is I use a "warm up" piece. So at night, when I curl up to hand quilt for a bit, I start by stitching on a "warm up" piece. Once my fingers and hands get into a rhythm I switch over to my project.

    I make a "warm up" piece from leftover quilt squares etc. that will eventually become potholders, or mug rugs etc. Things that don't require the finest stitching I can produce!

    Good luck! Sounds like you're going great so far!!!
    CarrieC is offline  
    Old 09-22-2011, 11:26 AM
      #13  
    Super Member
     
    Join Date: Aug 2010
    Location: Houston, TX
    Posts: 3,955
    Default

    Originally Posted by CarrieC
    My only hint is I use a "warm up" piece. So at night, when I curl up to hand quilt for a bit, I start by stitching on a "warm up" piece. Once my fingers and hands get into a rhythm I switch over to my project.

    I make a "warm up" piece from leftover quilt squares etc. that will eventually become potholders, or mug rugs etc. Things that don't require the finest stitching I can produce!

    Good luck! Sounds like you're going great so far!!!
    What a really handy tip - thanks for sharing
    butterflies5518 is offline  
    Old 09-22-2011, 11:31 AM
      #14  
    Super Member
     
    sweetpea's Avatar
     
    Join Date: Jul 2010
    Location: southeast Kansas
    Posts: 1,086
    Default

    just keep at it. it will get better with time. Good luck and enjoy your time at the frame.
    sweetpea is offline  
    Old 09-22-2011, 11:48 AM
      #15  
    Super Member
     
    Join Date: Mar 2011
    Location: Central NJ
    Posts: 5,571
    Default

    I use stencils all the time. They are wonderful. For the most part I've gotten away from SID quilting for this very reason. Also another reason I press my seams open. I try to find stencils that are complimentary to the quilt, either flowing or boxy - you get the idea. Now my latest quilt was a table topper, carpenter's star/wheel and the fabrics were very bold. I just wanted the quilt pattern to speak so I only did SID. Painful but what I wanted for that piece.
    NJ Quilter is offline  
    Old 09-22-2011, 11:49 AM
      #16  
    Senior Member
    Thread Starter
     
    Join Date: May 2010
    Location: Stanley NC
    Posts: 981
    Default

    Originally Posted by NJ Quilter
    I use stencils all the time. They are wonderful. For the most part I've gotten away from SID quilting for this very reason. Also another reason I press my seams open. I try to find stencils that are complimentary to the quilt, either flowing or boxy - you get the idea. Now my latest quilt was a table topper, carpenter's star/wheel and the fabrics were very bold. I just wanted the quilt pattern to speak so I only did SID. Painful but what I wanted for that piece.
    All advice I've ever gotten is NEVER press seams open because it weakens the seam when hand pieced. Do you have any problems with that?
    teddysmom is offline  
    Old 09-22-2011, 12:17 PM
      #17  
    Super Member
     
    117becca's Avatar
     
    Join Date: Oct 2010
    Location: dayton OH
    Posts: 1,911
    Default

    i will also try to avoid seams. Sometimes I will run the needle under the top layer to the other side of the seam and start stitching again.
    117becca is offline  
    Old 09-22-2011, 12:31 PM
      #18  
    Senior Member
     
    Hinterland's Avatar
     
    Join Date: Oct 2009
    Location: Hudson Valley, NY
    Posts: 939
    Default

    Originally Posted by teddysmom
    All advice I've ever gotten is NEVER press seams open because it weakens the seam when hand pieced. Do you have any problems with that?
    I wouldn't press a hand pieced seam open, but that's me. I pressed machine pieced seams open on my latest project, which I hope to be hand quilting soon. I'm hoping it all works out okay.

    Janet
    Hinterland is offline  
    Old 09-22-2011, 06:34 PM
      #19  
    Super Member
     
    Join Date: Mar 2011
    Location: Central NJ
    Posts: 5,571
    Default

    Originally Posted by teddysmom
    Originally Posted by NJ Quilter
    I use stencils all the time. They are wonderful. For the most part I've gotten away from SID quilting for this very reason. Also another reason I press my seams open. I try to find stencils that are complimentary to the quilt, either flowing or boxy - you get the idea. Now my latest quilt was a table topper, carpenter's star/wheel and the fabrics were very bold. I just wanted the quilt pattern to speak so I only did SID. Painful but what I wanted for that piece.
    All advice I've ever gotten is NEVER press seams open because it weakens the seam when hand pieced. Do you have any problems with that?
    I typically machine piece my quilts. I've never had an issue with the seams being pressed open. Neither with weak seams or with batting coming through. Hand piecing may present other issues. I've only hand pieced one quilt - a tumbling block and did english paper piecing with it so the seams were done to the side on that one.
    NJ Quilter is offline  
    Old 09-22-2011, 06:41 PM
      #20  
    Power Poster
     
    sewbizgirl's Avatar
     
    Join Date: Oct 2010
    Location: Mississippi
    Posts: 26,229
    Default

    Originally Posted by teddysmom
    I'm a newbie who hand quilts. I'm quilting a 9 patch and am quilting around each patch. I'm still trying to get my stitches smaller and even but have a problem when I'm stitching over the seam allowance that has been pressed to one side. Have you ever used templates or stencils for your design? This would mean less stitching over the bulky edges?
    I think this is why "echo quilting" was devised... to stay away from the bulky seams and just echo them, maybe 1/4" or 1/2" away.
    sewbizgirl is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    teddysmom
    Main
    7
    05-23-2011 07:41 PM
    just_the_scraps_m'am
    Main
    0
    06-24-2010 08:00 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter