help with bobbins messing up
10-05-2017, 06:03 PM
#11
Super Member
Join Date: Jul 2013
Location: Houston, TX
Posts: 9,608
10-05-2017, 06:57 PM
#12
Super Member
Join Date: Nov 2010
Location: Utah
Posts: 2,079
Featherweights thread from right to left. The flat side of the needle will face to the left. Make sure your top tension is set at 3, then adjust from there.
I've learned that Singer needles have a slightly smaller shaft at the top. I didn't know they were a bit shorter. I'll have to check that out.
We use Schmetz needles when we service Featherweights.
I've learned that Singer needles have a slightly smaller shaft at the top. I didn't know they were a bit shorter. I'll have to check that out.
We use Schmetz needles when we service Featherweights.
10-06-2017, 05:53 AM
#14
Senior Member
Join Date: May 2010
Location: SW, MI
Posts: 827
I suddenly had the same problem with my 301. I unthreaded, took the bobbin out and cleaned it, put the bobbin back in the casing rethreaded, still had a problem. Did it all again and got the flashlight so I made sure I got everything out of the bobbin area. Rethreaded again, put the bobbin in the casing again. Oh, and I put a new needle in the first time I did this whole thing. Everything was fine. I guess I just had a bit of lint or thread stuck in the bobbin area. You have to clean really well in that area. Just a tiny bit in the wrong place messes things up.
10-06-2017, 05:56 AM
#15
Power Poster
Join Date: Jul 2017
Location: Central Ohio
Posts: 15,232
Very true- lint can cause all kinds of problems.
Have you ever visited the Featherweight shop? It's a great place for all things Featherweight. The owners are wonderful as well.
https://singer-featherweight.com/
check out the link called Schoolhouse- it's a treasure trove of tips to maintain and fix things.
Have you ever visited the Featherweight shop? It's a great place for all things Featherweight. The owners are wonderful as well.
https://singer-featherweight.com/
check out the link called Schoolhouse- it's a treasure trove of tips to maintain and fix things.
Last edited by SusieQOH; 10-06-2017 at 05:59 AM.
10-06-2017, 09:01 AM
#16
Super Member
Join Date: Jan 2009
Location: Southern California
Posts: 6,254
Try retreading, birds nest can be created from improper threading even when you thinks it's done correctly. I had this problem in my embroidery machine and it took me forever to figure it out because I know how to thread my machine I always assume it's never a threading problem but it still can be. And don't assume it's retreading just the bobbin either
10-06-2017, 10:03 AM
#17
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Having this same issue with two very different machines makes me think operator error not something wrong with the machines. The first thing I thought of is something that hasn't been brought up. You said "they both have big loops on the back of the material, then they won't pick up the bobbin thread or the thread tangles." Not putting the presser foot down will cause these symptoms in any sewing machine.
Cari
Cari
10-07-2017, 05:17 AM
#20
Super Member
Join Date: Feb 2009
Location: Twin Falls, ID
Posts: 1,409
Everytime I have this problem it is because the top thread is not in the tension discs. Be sure and thread your machine with your presser foot up, and don't lower the presser foot until you are ready to thread the needle. This makes sure the tension discs are open when you are threading, and when you lower the presser foot it tightens the tension discs.
Help am down two machines doing the same thing. They both have big loops on the backof the material. then they either wont pick up the bobbin thread or get tangled. I know the singer quantum has to go to shop I am hoping some one can help with the featherweight along with loops and rats nest it seems to stop moving forward. thanks in advance for any help
Thread
Thread Starter
Forum
Replies
Last Post
Vandamme
Main
37
05-15-2018 03:46 PM
hudgoddess
Main
21
11-10-2015 11:25 PM
