Help with cutting fabric
#11
I fold my fabric down the center and don't worry about how the selvages look and even up the left side and start cutting it up and evening after so many cuts. I read to do this in some quilt book, somewhere along the way. If you fold selvages even you will notice your center fold will not look right.
#12
Every quilt class I have taken each instructor has showed a different way to fold and cut fabric. Some used two rulers to line up the fold, some said only one fold, some said selvages had to be even, some said re straighted after two cuts, some said rip for a straight line, some say pull a thread. I tune out that part of a class now, I've seen every possible way to cut.
#13
Originally Posted by BellaBoo
I have resorted at times to gluing my selvages together and then pressing to get exact straight folds. My cuts were always off so I knew to buy extra fabric. That's why I was first in line to buy the fabric die cut machine.
I have looked at the machine online and in stores...it is soooooo expensive! Do you feel that it is worth it?
Thanks!
#14
Obviously, many of those who cut the fabric at the store are not worried about getting a perfectly straight cut that will make the fabric line up on the cutting table. I have had fabric that, lined up selvage to selvage be off by more than six inches, straight from the store. So, I always buy more than I need because I hate getting a project started, only to find out that I am a couple inches shy of what I needed and have to make a trip back to the store, or worse yet, not find the fabric again to continue.
#16
Senior Member
Join Date: Oct 2009
Posts: 682
I fold the fabric in half lengthwise and press lightly. Then I lay a larger square plastic ruler like 12 1/2 square along the selvedge and that gives you a perfect 90 degree angle. if you continue this line across, you should get a perfect 90 degree angle in the center and thus not have a bow in it. If I am cutting smaller lengths, I start at the selvedge and cut my pieces toward the center. Then all that is wasted because of the bow is the small part you cannot use.
#19
Power Poster
Join Date: Mar 2009
Posts: 15,639
After I iron my fabric, I fold it selvage to selvage and let it hang freely. You can see by whether it hangs straight or is pulled toward one direction. If it is pulled, then I carefully shuffle it until it hangs straight.
I then lay it on the cutting mat and smooth it out with my hands, but I do not iron it.
It sounds like you might not have had the two halves aligned and the ironing emphasized that distortion.
I then lay it on the cutting mat and smooth it out with my hands, but I do not iron it.
It sounds like you might not have had the two halves aligned and the ironing emphasized that distortion.
#20
Originally Posted by BellaBoo
I have resorted at times to gluing my selvages together and then pressing to get exact straight folds. My cuts were always off so I knew to buy extra fabric. That's why I was first in line to buy the fabric die cut machine.
My girlfriend bought the Accucut and she absolutely loves it! She will allow others to use it and when she takes it to a class or retreat, she "rents" it out for use. I haven't rented it yet but from everyone else who has used it, they all rave about how wonderful it is.
Thread
Thread Starter
Forum
Replies
Last Post
AntBird
Main
24
01-08-2012 01:16 PM