HELP!!!!! machine issues
#51
Originally Posted by tealfalcon
ok i will try ry again....boo hoo i wanna sew not thread my machine all day
Sounds like a tension problem to me. Check your machine settings according to the book that came with your machine and try again.
#52
Senior Member
Join Date: Oct 2009
Location: montana
Posts: 620
Originally Posted by sharon b
Try winding a new bobbin- clean out the bobbin area , sometimes a small thread can get hung up somewhere . After the new bobbin rethread the machine - I know AGAIN- but sometimes something is just not the way it needs to be . Make sure you have the correct needle for the fabric .
Good Luck I know how frustrating it can be
Good Luck I know how frustrating it can be
tensions are made for adjusting. just change in small increments until you get the right balance.
#54
Originally Posted by raptureready
Sounds to me like the tension is out of whack. Either too tight on the top or too loose on the bottom. You might try adjusting it or, if you aren't comfortable doing that, take it back to your dealer and have them make the adjustment. It should still be under warranty.
#56
You may have unknowingly changed the tension. Check the tension. Change the needle. Wind a new bobbin. Re-thread everything. If none of that works, I would take it in and have it looked at. It is under warranty. Shouldn't cost you anything.
#57
Banned
Join Date: Dec 2010
Location: Corpus Christi, Tx
Posts: 847
I have a couple of baby lock machines...I've had that issue and the guy I bought mine from said to use canned air to blow out any frabic dust from the tension dial(s). This has helped sometimes.
Another thing that I have had to do is set my sewing machine bobbin tension by using the weights from my embroidery professional machine.
I don't know if this helps but I do know as much as I love my babylocks and brother machines that this is my main frustration with them.
Another thing that I have had to do is set my sewing machine bobbin tension by using the weights from my embroidery professional machine.
I don't know if this helps but I do know as much as I love my babylocks and brother machines that this is my main frustration with them.
Thread
Thread Starter
Forum
Replies
Last Post