Help with SID
#21
Super Member
Join Date: Feb 2011
Location: Rhode Island
Posts: 1,663
I agree with franc36 - I seem to have much better luck with the open-toe foot than the edge joining foot. I guess it's because I can see better what I'm doing. But I totally LOVE prism's idea of using the serpentine stitch - will definitely try that on my next project!
#22
Super Member
Join Date: Aug 2010
Location: Jacksonville, FL
Posts: 1,389
Something that really helps me is to put 2 door stops under the back side of my machine to slightly tip it forward. It changes the angle and I can steer much better with far less fatigue in my shoulders. You can get them at Dollar Tree ... there are two sizes and I buy the larger one ... it even comes in white to match my furniture! LOL
#24
Super Member
Join Date: Jun 2008
Location: Utah
Posts: 8,847
Can you move the needle position on your machine? I move mine to the far right so the edge of the foot rests right next to the ditch. Then when I'm feeding the fabric I don't watch the needle but instead keep my eye on the foot. It's kind of like when you're driving - you look ahead on the road instead of right at the front of the car.
#26
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
What brand of thread did you use?
#27
Super Member
Join Date: Aug 2010
Location: Delmarva Peninsula
Posts: 1,151
I will do this the next time instead of SID - no matter what I try to do, I am not happy with my SID>
Great idea!!
Great idea!!
I refuse to do SID because it drove me crazy!
What I do instead is a serpentine stitch over seams. Serpentine is a built-in decorative stitch on many machines; looks like an S. I adjust the stitch length and width on my machine to create an S shape that I like.
Because serpentine uses more thread than a straight stitch, I like to use Aurifil 50wt 2-ply. This thread is perfect because it creates very little lint, it's finer because it's 2-ply instead of the more standard 3-ply, and the bobbin can hold a lot more of it before the bobbin runs out.
The *huge* advantage over SID is that I can depress the foot pedal completely and merrily sew away on top of seams. The serpentine is *very* forgiving of minor deviations. I no longer have eyestrain and also have no emotional tension trying to achieve a "perfect" SID.
Plus, I like the soft effect the serpentine stitch gives to the quilting.
What I do instead is a serpentine stitch over seams. Serpentine is a built-in decorative stitch on many machines; looks like an S. I adjust the stitch length and width on my machine to create an S shape that I like.
Because serpentine uses more thread than a straight stitch, I like to use Aurifil 50wt 2-ply. This thread is perfect because it creates very little lint, it's finer because it's 2-ply instead of the more standard 3-ply, and the bobbin can hold a lot more of it before the bobbin runs out.
The *huge* advantage over SID is that I can depress the foot pedal completely and merrily sew away on top of seams. The serpentine is *very* forgiving of minor deviations. I no longer have eyestrain and also have no emotional tension trying to achieve a "perfect" SID.
Plus, I like the soft effect the serpentine stitch gives to the quilting.
#29
Member
Join Date: Sep 2010
Posts: 69
My machine won't use invisible thread or at least I can't get it too. It binds up and breaks. Am I going something wrong? LOL what am I doing right would be a much shorter answer! I do seem to have my problems <G>
#30
I have SID quite a few times and the most important thing is that the seams are pressed to one side. Then you sew on the side where there are no seams, that is the ditch. Go slow till you get the feel of it.
Thread
Thread Starter
Forum
Replies
Last Post