HSTs - different method - any mathemagicians here??
#11
Junior Member
Thread Starter
Join Date: Sep 2009
Location: Carolinas
Posts: 239
This is great! Thanks!
Originally Posted by NewYearsOld
I've done this before too. Hope this helps!
Ok, I'm not sure what size HST you are wanting to finish with. If you need 8 (2inch) finished HST, you would want the starting squares to be 5 3/4" x 5 3/4". So, in other words, start with 7/8" larger than the finished HST should be when making only 2.
8 x 3 inch finished = 7 3/4 x 7 3/4 starting squares
8 x 4 inch finished = 9 3/4 x 9 3/4 starting squares
8 x 5 inch finished = 11 3/4 x 11 3/4 starting squares
8 x 6 inch finished = 13 3/4 x 13 3/4 starting squares
PM me if I can make it more clear. :)
Ok, I'm not sure what size HST you are wanting to finish with. If you need 8 (2inch) finished HST, you would want the starting squares to be 5 3/4" x 5 3/4". So, in other words, start with 7/8" larger than the finished HST should be when making only 2.
8 x 3 inch finished = 7 3/4 x 7 3/4 starting squares
8 x 4 inch finished = 9 3/4 x 9 3/4 starting squares
8 x 5 inch finished = 11 3/4 x 11 3/4 starting squares
8 x 6 inch finished = 13 3/4 x 13 3/4 starting squares
PM me if I can make it more clear. :)
#12
This is how my mind works out the math.
Normally, you take what you want for a finished size (2") and add 7/8" and cut two blocks, mark diagonally, sew on each side and cut to get two squares. I always add and extra 1/8" so I would start with 3" blocks.
In your diagram, you basically have 4 blocks. So 3+3=6 and I would start with a six inch block and follow your instructions.
Finish 3" would be 8" block
Finish 4" would be 10" block
Looks like the formula would be finished x 2 + 2 the way I do it.
And then I would square up.....however, there is a tute on here for making HSTs that I love, and have been using that method...no squaring up! You sew two strips together on both sides, and use a triangle ruler to cut the blocks out. They come out perfect with little waste.
Diane
Normally, you take what you want for a finished size (2") and add 7/8" and cut two blocks, mark diagonally, sew on each side and cut to get two squares. I always add and extra 1/8" so I would start with 3" blocks.
In your diagram, you basically have 4 blocks. So 3+3=6 and I would start with a six inch block and follow your instructions.
Finish 3" would be 8" block
Finish 4" would be 10" block
Looks like the formula would be finished x 2 + 2 the way I do it.
And then I would square up.....however, there is a tute on here for making HSTs that I love, and have been using that method...no squaring up! You sew two strips together on both sides, and use a triangle ruler to cut the blocks out. They come out perfect with little waste.
Diane
Thread
Thread Starter
Forum
Replies
Last Post
copycat
Main
9
04-13-2016 11:51 AM
tooMuchFabric
Pictures
30
06-17-2010 11:01 PM