I am at my wits end!!!!
#12
Power Poster
Join Date: Jun 2011
Location: Southern California
Posts: 19,127
Take a tea break and relax (too early for happy hour!). Yes, you have to get it done since you are so close to the finish line. Lots of good suggestions posted but you already know about my trick using the Sewer's aid. I always preferred Sulky invisible thread. Never had a problem with it. Hang in there and don't forget to breathe !!!
#13
Junior Member
Thread Starter
Join Date: Nov 2011
Location: Freeport, Pennsylvania
Posts: 148
Well, checked the throat plate and it turns out there were a few nicks/burrs. I used some fingernail emery paper to sand out the rough edges and so far, no more thread breakage. So, if it doesn't happen again, that was the problem. Thanks for all suggestions.
#14
Power Poster
Join Date: Mar 2009
Posts: 15,639
It may be that your needle has a burr or the needle is too small. Try a topstitch needle in a size larger than what you are using now. The way the topstitch needle is made doesn't allow for burrs. Good luck and much patience.
#16
Senior Member
Join Date: Feb 2012
Posts: 432
i so love the knowledge base of this group. i am thread painting with rayon thread and it keeps shredding as well. not enough that i am getting totally frustrated, but enough to slow things down. i'll double check for something shredding and slow down my hand motions, see if that helps.
#18
Junior Member
Thread Starter
Join Date: Nov 2011
Location: Freeport, Pennsylvania
Posts: 148
Update: All was well until about 30 minutes in and then the thread started breaking again. I am starting to think that it is the machine. It just does not want to be used for quilting and just wants to be used for regular stitching and decorative stitching. On a positive note though, I did make some progress so all is not lost.
#20
Is it possible you have the wrong sized needles for your thread? I've found that makes a big difference.
Here's a handy chart that I keep laying around, showing what size needles are best for the various thread sizes.
I think I originally got it from Superior's website:
Size #70/10 - #100, (60 wt.) & MonoPoly.
Size #80/12 - #50 (50 wt.) threads.
Size #90/14 - #40 (40 wt.) threads.
Size #100/16 - #30 (30 wt.) threads and thicker.
Here's a handy chart that I keep laying around, showing what size needles are best for the various thread sizes.
I think I originally got it from Superior's website:
Size #70/10 - #100, (60 wt.) & MonoPoly.
Size #80/12 - #50 (50 wt.) threads.
Size #90/14 - #40 (40 wt.) threads.
Size #100/16 - #30 (30 wt.) threads and thicker.
Thread
Thread Starter
Forum
Replies
Last Post
3flowers
General Chit-Chat (non-quilting talk)
12
09-30-2010 11:11 PM
pittsburgpam
General Chit-Chat (non-quilting talk)
77
01-28-2010 06:04 AM