I bought the Gingher seam ripper today but...
#81
I use an edge stiching foot, set to 1/4" so I don't do too much ripping. However, paper peicing requires ME to rip every seam several times before I get it right. So I love my Fons & Porter Ripper.
#82
Originally Posted by gale
when I tried to rip out a practice seam my stitches were too small for the end of the ripper to fit underneat. Are my stitches too small maybe? I think it's 2.2 and I have a Janome 6600. It's the default and I never changed it. Or am I doing it wrong?
"Are my stitches too small maybe? I think it's 2.2 and I have a Janome 6600."
your stitches are not too small. they may not be the right size to work with that tool in the way you're used to using a seam ripper, but that doesn't mean there's anything wrong with either the stitches or the ripper.
there are two ways to use a seam ripper. (1) as a stitch picker; or (2) as a stitch cutter.
when we slip the long, straight tip under a stitch and use it to pull out the threads, or to cut that single stitch, we are stitch picking.
when we put the tool between the two layers of fabric and use the sharp curved "innie" to cut the stitches (one or more at a time) we are stitch cutting.
i've never used the gingher so i have to guess which method it's designed for. my guess is that it's designed as a stitch cutter. it looks ideal for that method. since it's a gingher i feel safe assuming it will serve you well and for a very long time if you use it that way.
i'm a stitch picker. it's the method that works best for me because i have a tendency to slip and cut holes in my fabric when i try to use the cutting technique. i buy tools that have very thin tips so they'll fit under small stitches. if i've misplaced my favorite tool and can only find the one with the "big clunky" tip, i just make my stitches big enough to fit it.
i use a Janome MC6600. while piecing, i find that a stitch sized 2.5 will accomodate just about any size ripper tip. for quilting, i crank it up to at least a 3.
soooooo, you can either increase your stitch size so you can use the tool for picking, or you can teach yourself to use it for cutting. if you do that, the stitch size won't matter at all. the only things required are good light and a steady hand. :-)
#84
[quote=GwenH]
Sounds like how I do it, only mine is not a clover, its a no name with a tiny blade.
Originally Posted by EasyPeezy
I usually use my Clover seam ripper or the one that come with the sewing
machine. The Clover has a a nicer handle. I use an even smaller stitch
length - 1.8 on my Janome 6600. I find it easier if I turn the seam ripper on
the side rather than straight down...the blade is flat against the fabric
instead of perpendicular. See what I mean? And I unstitch every two or
three stitches then pull the thread on the other side. It's very easy.[/quot
I also use the clover seam ripper, and I love it, it has a nice sharp point on it and it's way better than the one that comes with your machine, and I use it the same way as Easy Peezy, with the blade flat against the fabric and I also ripe every two or three stitches then pull the thread on the other side, sometimes if I hold my mouth just right I can go 8 or 10 stitches apart, and pull a long thread out. I also have a Janome machine, mine is the 6500 though, but it has 2.2 for the preset stitch length, and I mostly always use that setting.
Here's a link for the clover seam ripper so you can see what it looks like.
http://www.clover-usa.com/product/0/...rWhite_Plastic
machine. The Clover has a a nicer handle. I use an even smaller stitch
length - 1.8 on my Janome 6600. I find it easier if I turn the seam ripper on
the side rather than straight down...the blade is flat against the fabric
instead of perpendicular. See what I mean? And I unstitch every two or
three stitches then pull the thread on the other side. It's very easy.[/quot
I also use the clover seam ripper, and I love it, it has a nice sharp point on it and it's way better than the one that comes with your machine, and I use it the same way as Easy Peezy, with the blade flat against the fabric and I also ripe every two or three stitches then pull the thread on the other side, sometimes if I hold my mouth just right I can go 8 or 10 stitches apart, and pull a long thread out. I also have a Janome machine, mine is the 6500 though, but it has 2.2 for the preset stitch length, and I mostly always use that setting.
Here's a link for the clover seam ripper so you can see what it looks like.
http://www.clover-usa.com/product/0/...rWhite_Plastic
#85
I decided to return the gingher one the next time I'm at Joann's. I found one today that looks just like it, only with a plastic handle, for 1/4 the price of the gingher on sale.
#87
Super Member
Join Date: Dec 2006
Location: NW Wa
Posts: 1,549
Yes for quilting your sts set at 2.2 is to short...
Try a 3.0 to 3.5 is the normal unless doing a barjello or
a srtip pattern you are going to be cutting..
Another thing to also think about the more stitched per ich the weaker the seam will be.
Think of it this way a picec of vinal the closer the stitches the easier it tears.
Good luck,
ConnieF
Try a 3.0 to 3.5 is the normal unless doing a barjello or
a srtip pattern you are going to be cutting..
Another thing to also think about the more stitched per ich the weaker the seam will be.
Think of it this way a picec of vinal the closer the stitches the easier it tears.
Good luck,
ConnieF
#89
Super Member
Join Date: Mar 2008
Location: AZ and CT
Posts: 4,898
Originally Posted by gale
when I tried to rip out a practice seam my stitches were too small for the end of the ripper to fit underneat. Are my stitches too small maybe? I think it's 2.2 and I have a Janome 6600. It's the default and I never changed it. Or am I doing it wrong?
I use my seam ripper on the bobbin side and cut through about every 1/2 inch. Then pull the thread from the needle side - comes out like zipping a zipper. Use a piece of masking tape to pick up the loose threads.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
2
06-14-2010 10:02 PM