I need a little help please with machine applique
#1
I need a little help please with machine applique
I am making the William Morris Friends quilt and since I do all of my applique by the needle turn method I need some advice before I start to do machine applique. Do I use a stabilizer on the back of my square and if so what kind? Do I use the tear-away or permanent? Thanks for your help.
Last edited by QuiltnNan; 02-08-2012 at 07:35 AM. Reason: clarify title to reflect contents
#2
Super Member
Join Date: Jan 2010
Location: Outer Space
Posts: 9,319
Really, it depends on what kind of applique stitch you're going to use. Tight satin stitching will need some kind of tear away. Other stitches like button hole and blind hem etc. it will depend also. I can sometimes get away with starching heavily the background piece. Do a sample and see.
#4
Super Member
Join Date: Dec 2010
Location: New York City/Manhattan
Posts: 1,316
also, there is a foot made that one part of the stitch goes over this little wire on the foot (I know, clear as mud) that helps keep the stitching flat so it won't pucker. I use this foot a lot when I do machine applique.
#5
Power Poster
Join Date: Dec 2008
Location: Western Wisconsin
Posts: 12,930
I do machine applique, and instead of using stabilizer I heavily starch the background fabric before cutting it into squares. Basically I mix a 1:1 solution of STa-Flo laundry starch and water, "paint" it on the fabric until the fabric is saturated, toss the fabric in the dryer, then iron with steam. Most of what I do is invisible machine applique, but I have successfully used this technique with fused applique and a satin stitch.
If you have already cut the background squares, try using Stitch and Ditch underneath the background fabric. I got mine on Amazon. It is very lightweight, so is easy to remove afterwards.
If you have already cut the background squares, try using Stitch and Ditch underneath the background fabric. I got mine on Amazon. It is very lightweight, so is easy to remove afterwards.
#6
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
are you doing raw edge applique? you could use fusable--like heat & bond lite- then a button hole stitch or small zig zag works well-
if you plan a satin stitch a stablizer is necessary to keep the blocks from puckering- it is your choice whether or not you want one to stay in (adding a layer & weight) to your quilt blocks- or a removable (there is tear away or wash away) do they have recommendations included with the pattern or book? generally the designer/author suggests what works best...i would follow those recommendations
if you plan a satin stitch a stablizer is necessary to keep the blocks from puckering- it is your choice whether or not you want one to stay in (adding a layer & weight) to your quilt blocks- or a removable (there is tear away or wash away) do they have recommendations included with the pattern or book? generally the designer/author suggests what works best...i would follow those recommendations
#8
The last couple of applique quilts I made, I used a lightweight stabilizer that is termed "cut away." I think it's designed for use in machine embroidery. Anyway, after completing the buttonhole stitching I just trimmed the stabilizer about a quarter inch away, and left it in. It isn't stiff and in the finished quilt you can't tell it's there, and it was a hundred percent easier than tearing away the other kind of stabilizer and picking out the little pieces.
Thread
Thread Starter
Forum
Replies
Last Post
grann of 6
Pictures
24
08-23-2010 03:26 AM
craftybear
Main
22
07-06-2010 05:51 PM