Inexpensive new mechanical machine
#11
Junior Member
Join Date: Jan 2013
Posts: 269
I'm not the OP, but I had considered buying a featherweight since I was looking for light and portable and mostly for piecing, but in considering the current price of them in my area ($400), plus it would probably need to be checked out by a repair shop and may require maintenance (minimum $100), and if it needed a new motor ($150 for the part) or other parts, the costs were just racking up. Combined with the fact that with a used machine purchased from an individual, there is no return policy, it wasn't worth the risk for me.
At least with a new (cheap) machine, it wasn't much upfront cost and I could return it if there were issues (which there have been for me). I knew Singers were cheaply made and not of good quality anymore, so I was prepared for problems at least
At least with a new (cheap) machine, it wasn't much upfront cost and I could return it if there were issues (which there have been for me). I knew Singers were cheaply made and not of good quality anymore, so I was prepared for problems at least
#12
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Check out the Eversewn machines. They're getting great reviews, a lot of machine for a smaller price point. There are 3 mechanical models, Sparrow 15, Maker 100 and Maker 200. Amazon sells them as well as some dealers.
Cari
Cari
#13
Power Poster
Join Date: Jan 2011
Location: Southern USA
Posts: 16,431
Yes to Sparrow! I think I'm the only one in my guild that doesn't have one yet. LOL Everyone loves the Sparrow 25. The Sparrow Hero has embroidery. I'd buy the Hero for the auto thread cutter. The auto thread cutter saves me a lot of dollars in thread cost.
#14
Senior Member
Join Date: Jun 2011
Location: Cedar Falls, IA
Posts: 923
For less than $100 in most of the country, the OP could buy a Singer 201 in very good shape. This was the Cadillac of sewing machines when it came out, and it makes a beautiful straight stitch. It will also last until she gives it to grandchildren on her deathbed, assuming just a little bit of regular oiling. For less money, she can buy a Singer 66, another good machine. These don't have needle threaders or needle-down buttons, but they are rugged, easy to maintain, and just about bullet proof with a beautiful stitch quality. If you need portability and cuteness, the Singer 221 (Featherweight) is also a nice machine but not as rugged as the other two. I have two of each type, though I haven't used any of the 66s recently, and only one of the 201 and 221 get used. I really should thin the herd some.
#15
Super Member
Join Date: Jul 2013
Location: Houston, TX
Posts: 9,737
For less than $100 in most of the country, the OP could buy a Singer 201 in very good shape. This was the Cadillac of sewing machines when it came out, and it makes a beautiful straight stitch. It will also last until she gives it to grandchildren on her deathbed, assuming just a little bit of regular oiling. For less money, she can buy a Singer 66, another good machine. These don't have needle threaders or needle-down buttons, but they are rugged, easy to maintain, and just about bullet proof with a beautiful stitch quality. If you need portability and cuteness, the Singer 221 (Featherweight) is also a nice machine but not as rugged as the other two. I have two of each type, though I haven't used any of the 66s recently, and only one of the 201 and 221 get used. I really should thin the herd some.
Last edited by cashs_mom; 05-30-2017 at 01:09 PM. Reason: Can't spell some days
#16
Power Poster
Join Date: Nov 2009
Location: Mableton, GA
Posts: 11,335
For less than $100 in most of the country, the OP could buy a Singer 201 in very good shape. This was the Cadillac of sewing machines when it came out, and it makes a beautiful straight stitch. It will also last until she gives it to grandchildren on her deathbed, assuming just a little bit of regular oiling. For less money, she can buy a Singer 66, another good machine. These don't have needle threaders or needle-down buttons, but they are rugged, easy to maintain, and just about bullet proof with a beautiful stitch quality. If you need portability and cuteness, the Singer 221 (Featherweight) is also a nice machine but not as rugged as the other two. I have two of each type, though I haven't used any of the 66s recently, and only one of the 201 and 221 get used. I really should thin the herd some.
#19
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
Thread
Thread Starter
Forum
Replies
Last Post
mmncsw
Main
33
08-12-2017 08:38 AM
Bicycle Hobo
Links and Resources
3
01-26-2013 10:21 AM
Annaquilts
Main
2
07-07-2010 06:10 AM