Janome 6600, Bottom Line, Connecting Threads and FMQ
#11
Member
Join Date: Jan 2011
Location: northeast Wisconsin
Posts: 16
I just went through what you are going through and I am blessed with having Joann at the LQS where I bought my 6600 a few years ago.....I took it to her yesterday while she was working and she got it FMQ again beautifully by adjusting the tension on the blue bobbin case. In the old days I knew my case was the right tension by taking ahold of the thread in the bobbin and shaking it a bit. If it didn't drop to the floor it was right on or if it wouldn't shake down at all it was to tight. Can't do that anymore but they do get out of adjustment with use and I took mine to classes etc so it got jiggled around a bit. It took some time but she got it going right. Check your manual and it will tell you if you need to turn it right or left. She even knew the page number but I had forgotten my book and she couldn't find the shop one. Good luck, thread and machine is both good. I use Connecting Thread in top and bottom. I forgot to say I use mode 2 which comes up as stitch 11 automatically, number 1 on the pressure foot knob on the top of the machine and the thread tension 5 and of course you already know the feed dogs down. Good luck. I am half done with my quilt FMQing it myself.
Last edited by DarleneW; 05-25-2013 at 08:06 AM.
#12
Senior Member
Thread Starter
Join Date: Nov 2010
Location: North Carolina
Posts: 865
Sewnoma, I've had that thread for a while. Not sure if it's mahogany, espresso or bark. It's a dark, rich brown.
Darlene, This is the first time I've used my blue bobbin case...so it's pretty disappointing. I thought the whole point of having it was not having to make adjustments. It's really frustrating to think I have to do that, but I'll keep it in mind. Glad it's working out for you and hope to see your latest posted soon!
Darlene, This is the first time I've used my blue bobbin case...so it's pretty disappointing. I thought the whole point of having it was not having to make adjustments. It's really frustrating to think I have to do that, but I'll keep it in mind. Glad it's working out for you and hope to see your latest posted soon!
#13
I also only use titanium coated topstitch needles for all my sewing. I learned through trial and error that the good stuff is good stuff. I use Connecting Threads 50 3 ply wt thread a lot (great colors) and use a size 90/14 needle with a size 60 or 70 wt. thread in the bobbin. I start with 0 tension and go up 1/2 at a time until the stitch is what I want.
#15
The thin thread in the bobbin makes the seam flatter and the bobbin will hold much more thread. 50 wt 3 ply in both top and bottom makes the seam too thick for my liking and takes up too much of the seam allowance. It's all a matter of preference really. I experimented with all types of thread combinations over the years and know what works for me.
#17
Senior Member
Thread Starter
Join Date: Nov 2010
Location: North Carolina
Posts: 865
The reason I haven't tried that is the color. I'm using a dark brown on top that blends with the fabric, but my backing is a much lighter beige/grey color. The bottom line thread I've got in my bobbin right now just melts right into the backing fabric & disappears. The quality of my quilting is such that disappearing stitches is a very good thing!
#18
Super Member
Join Date: Oct 2009
Location: Maine-ly Florida
Posts: 3,927
#20
Thread
Thread Starter
Forum
Replies
Last Post
PghPat
Main
46
01-17-2015 03:46 PM