JustAbitCrazy

Sometimes I will use the thread on a bobbin to do handwork, rather than a spool, and it never occurred to me that when doing that I needed to knot the opposite way because the thread on the bobbin is wound on there the reverse of the spool. I was constantly getting knots. Someone on here mentioned the need to knot the loose (not freshly cut) end of the thread when working off a bobbin. Duh! Now I no longer have such problems. As long as I remember right away when I start....

Charley's Mom

When I took home economics at university (boy, does that date me!) we were always told to never use a thread more than 1 yard long. We had to pull the thread from nose to outstretched fingertips. After more than 60 years I still measure my thread this way. Also to thread the needle from the end coming off the spool is a great idea and it always works for me.

sparkys_mom

I just run my thread through a candle. Some of these other suggestions are probably better, but the candle helps.

matraina

Have you tried using "Thread Heaven" or beeswax?

Friday1961

This works the same way we used to untangle our phone cords (this dates me!) by letting the hand receiver dangle by the cord until it was straight.

judy363905

This is how I was taught also. Thread heaven is a good product, really like that little blue box

Judy in Phx, AZ

roserips

I have a love for hand piecing as well as hand quilting. In the beginning I had the same problem as you and spent a lot of time untangling knots. As you get better you realize that you are making those knots because you keep flipping your thread in circles. Try using thread only as long as your forearm that is form wrist to elbow. You will find as you improve the length of thread you use will grow longer. Also keep your thread moving left to right or right to left as the case may be so you are not putting those knots in it. You will find your stitches and enjoyment improving as you gain confidence in your work.

carolynjo

If you don't have anything else, run the thread over a candle.

gram2five

I constantly had a problem with my thread twisting and knotting. I gather 4 or 5 stitches on my needle before pulling it through. A friend suggested that I pull the needle through with my left hand (I'm right handed) every so often. What a difference! Problem almost totally eliminated.

misseva

I had the same problem when embroidering and found I was also turning my needle with each stitch. I have to make a very concentrated effort to roll the needle back to left to keep twisting at a minimum. And, when sewing grandmother flower garden hexies together, I was trying to use up all my older thread and found that the polyester thread twisted the most.