LOF vs WOF
#1
Member
Thread Starter
Join Date: Jun 2011
Posts: 28
![Default](/images/icons/icon1.gif)
Hi guys,
Is it possible to convert a quilt kit pattern that uses Width of Fabric cuts to Length of Fabric cuts? I can't buy anymore of the fabric so if it requires more fabric then I can't do it. I couldn't find anything in my searching to tell me how to convert?
Thanks,
-Moosie
Is it possible to convert a quilt kit pattern that uses Width of Fabric cuts to Length of Fabric cuts? I can't buy anymore of the fabric so if it requires more fabric then I can't do it. I couldn't find anything in my searching to tell me how to convert?
Thanks,
-Moosie
#3
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,581
![Default](/images/icons/icon1.gif)
I have found that my quilting fabric widths vary from 40 to 45 inches.
I usually make my first cuts length of fabric - but I usually have larger pieces of fabric available.
If you tell us how much fabric you have - length and width - and what you are trying to cut from it - someone might be able to give you a cutting diagram -
But if you don't have enough fabric to start with (if you need 500 square inches and you only have 400 square inches) - you still won't have enough if you cut it LOF or WOF.
But sometimes that forces creativity and the results are better than the original plan.
I usually make my first cuts length of fabric - but I usually have larger pieces of fabric available.
If you tell us how much fabric you have - length and width - and what you are trying to cut from it - someone might be able to give you a cutting diagram -
But if you don't have enough fabric to start with (if you need 500 square inches and you only have 400 square inches) - you still won't have enough if you cut it LOF or WOF.
But sometimes that forces creativity and the results are better than the original plan.
#5
Member
Thread Starter
Join Date: Jun 2011
Posts: 28
![Default](/images/icons/icon1.gif)
I have 43 usable inches in width (figuring 1/2" for selvages). I have 3.5 linear yards of fabric. So if I cut 43" widths I could fold it and cut the strips. However 43 x 3 = 129"/36"per yard=3.58 yards so I could be 2.88" short, assuming my math is right.
I'm trying to cut different size strips:
Strip size in ", number of strips needed in parentheses
1.25 (2)
2.75 (3)
3.5 (8)
4 (10)
9.5 (1)
4.25 (8)
I'm trying to cut different size strips:
Strip size in ", number of strips needed in parentheses
1.25 (2)
2.75 (3)
3.5 (8)
4 (10)
9.5 (1)
4.25 (8)
Last edited by moosie; 06-05-2019 at 04:33 PM.
#6
Super Member
Join Date: Jan 2012
Posts: 4,783
![Default](/images/icons/icon1.gif)
Since you can't get any more of the fabric, I wouldn't chance it. I'd follow the pattern. If you are cutting squares, it makes no difference which way you begin the cut, because in the end two of the sides will be WOF and the other two will be LOF.
#10
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
![Default](/images/icons/icon1.gif)
The cuts you listed add up to 122.25”
not sure why you want to cut your fabric lengthwise instead of width but cutting it wof. You have plenty
i would start with cutting a 40” piece then cut those (10) 4” strips, then the next largest 34” for the (8) 4.25” - the 28” piece for the (8) 3 1/2” strips, etc and work your way down to smallest piece needed.
not sure why you want to cut your fabric lengthwise instead of width but cutting it wof. You have plenty
i would start with cutting a 40” piece then cut those (10) 4” strips, then the next largest 34” for the (8) 4.25” - the 28” piece for the (8) 3 1/2” strips, etc and work your way down to smallest piece needed.
Last edited by ckcowl; 06-06-2019 at 12:21 AM.
Thread
Thread Starter
Forum
Replies
Last Post