Which machine (s) are best - from a Beginner
#22
Super Member
Join Date: Jan 2011
Location: Small town in Northeast Oregon close to Washington and Idaho
Posts: 2,795
I started with my mom's Singer and traded it in for a Viking Huskavarna 101 (I think that's what it was). Then I went to a computerized Viking 10 years later and now I'm using the Bernina 830. I had to work my way up. I gave my daughter my 1st Viking. I'm keeping my newer Viking for when I have to take my Bernina in to be cleaned or if it needs work done (which I've had no problems with it for 2 years). But, I started small and worked up. But I didn't have the needle down and it wouldn't thread itself and it wasn't self cutting and I lived with it, but now that computerized sewing machines came out, I could never go back. The difference is HUGE! If you just want to get your feet wet, there are a lot of good suggestions for inexpensive computerized sewing machines here. Maybe get one of them and after a couple of years, upgrade.
#25
For quilting, all you need is a machine that sews a straight stitch, both for piecing and quilting. Most older, vintage, all-metal machines have the capability to do patchwork as well as free motion quilting. You can even learn to do free motion embroidery on them. A nice Singer 15 or Japanese made Singer 15 clone machine will run you anywhere from $25 to $150 dollars depending on condition and accessories. Parts and feet are readily available, and there is a nice large harp to make your quilting experience easier.
Yes, you will have to thread your own needle and you will have to use the handwheel to raise and lower your needle. You will also have to cut your own thread. Big woop. You will also have a machine that will likely last your lifetime and then some. For a beginner, this IMHO is the best way to go. You can always throw massive amounts of money at a computer with a needle if you want to.
Just my opinion; your mileage may vary.
Yes, you will have to thread your own needle and you will have to use the handwheel to raise and lower your needle. You will also have to cut your own thread. Big woop. You will also have a machine that will likely last your lifetime and then some. For a beginner, this IMHO is the best way to go. You can always throw massive amounts of money at a computer with a needle if you want to.
Just my opinion; your mileage may vary.
#26
Super Member
Join Date: Sep 2011
Location: East Tennessee
Posts: 1,102
I am a new sewer/quilter as well, and I started with a 40-year old Elna. It was a fantastic machine!! Once I got my feet wet, I thought I needed an upgrade so my husband got me a Juki + Frame so I could teach myself how to machine quilt on a frame. I sold poor Elna. The frame-quilting was a mess and I sold it. In the mean-time, I found a Janome in a pawn shop for $30. It's a wonderful, perfect machine that I wouldn't trade for anything!
You can spend a lot of money on equipment if you want to. Or you can find a used Singer or Brother for $20 while you learn to use a sewing machine (because there is a learning curve with using a FMQ foot!!) then upgrade as you find deals. I have bought and sold several machines and I always get my money back because I'm always looking for that "good deal". Do research and know which brands are best and stick with them. It's a lot like buying a car.
You can spend a lot of money on equipment if you want to. Or you can find a used Singer or Brother for $20 while you learn to use a sewing machine (because there is a learning curve with using a FMQ foot!!) then upgrade as you find deals. I have bought and sold several machines and I always get my money back because I'm always looking for that "good deal". Do research and know which brands are best and stick with them. It's a lot like buying a car.
Last edited by AshleyR; 02-20-2012 at 03:44 AM. Reason: Add Picture
#27
Super Member
Join Date: Mar 2011
Location: Maryland
Posts: 2,376
When I first started I didn't want to spend alot since I didn't know if I'd even like quilting..so I got the brother CS6000i
and years later it is still a workhorse, super user friendly, under 200.00. I am going to upgrade to a laura ashley
quilting/embroidery but I know I will still use this little brother. It likes all threads, whereas the singer confident quilter I got as a gift is very touchy about thread and is sitting in its box!
and years later it is still a workhorse, super user friendly, under 200.00. I am going to upgrade to a laura ashley
quilting/embroidery but I know I will still use this little brother. It likes all threads, whereas the singer confident quilter I got as a gift is very touchy about thread and is sitting in its box!
#28
Since your very new to the quilting/sewing world, I would suggest getting a lower cost machine to start with. Not everyone enjoys quilting/sewing as they think they might. Some of the higher end machines can go up there in price. I have been sewing all my life, and just recently got a new Babylock. The first thing I would suggest is to find a local shop that sells machines. Go in and test them out, but first decide on a price, and go from there. Because each of us are different we all have different opinions on best machines! The reason I suggest going to a dealer, is because normally they will offer classes on the machine, that will help you learn to operate it. If you think you can learn on your own, check out Craigs list, or even ask about a used machine at the dealer. Alot of times they will offer lessons on the used ones as well. No matter what you decide to purchase, make sure its right for you...Good luck and happy shopping!
#29
Super Member
Join Date: Aug 2011
Location: Missouri
Posts: 1,250
I would look at used machines, since you are just beginning, you might not stay with quilting. Theres no use putting a lot of money into a new machine that can cost $6,000-$12,000. Also older used machines have less bells and
whistles which make them more user friendly. Look at Bernina 1090, or QE150, (180E for embroidery machine)
Sew on several brands and find one that works for you, be sure to buy a name brand machine,
plan to spend $800-$1500 on a good used machine.
whistles which make them more user friendly. Look at Bernina 1090, or QE150, (180E for embroidery machine)
Sew on several brands and find one that works for you, be sure to buy a name brand machine,
plan to spend $800-$1500 on a good used machine.
#30
Can't agree more. I now have a Brother 9000 and I love it. $200 at Walmart and it does all my expensive Viking can do and more. Snce you are beginning, do not invest thousands of dollars in a machine. Take a look at this machine. I think you will be suprised at all it does and so cheap!
I would suggest you get a name brand, Brother, Janomie etc. with the basics that you need for piecing and comes with a walking foot for quilting. I have 2 Brother machines and love them. Go to several quilt shops and try them out, usually they are very friendly and helpful. I would stay away from WalMart machines. They carry the low end of the brand name and don't have a long life to them. Good luck and welcome to the world of sewing, quilting, material and stash.
Thread
Thread Starter
Forum
Replies
Last Post