My new french braid ... with a twist!
#11
Super Member
Thread Starter
Join Date: Nov 2014
Location: Ontario Canada
Posts: 1,869
So here's two squares that I have right now. I'll be taking them apart (well, except for the french braid, which is PERFECT I must add!) It's my ever loving triangles!!!! I'm just going to sew all the french braids this morning and then take these two apart this afternoon and see how I feel later this evening. Just got back from a 3-hour run with the dog, so I should be good until at least 4:00!
[ATTACH=CONFIG]534073[/ATTACH]
[ATTACH=CONFIG]534073[/ATTACH]
#12
Take one of your braids and lay it on your cutting mat. Orient it as if the block were finished, using the lines on your cutting board to get it diagonal. Now take one of your rulers and lay it along perpendicular (up-down) edge as if it was one side of the finished block. Take another ruler (or anything straight) and lay it on the horizontal edge--so the two come together at a corner. What is the measurement on the ruler from the edge of the braid on the perpendicular side to the corner where the two rulers meet?
Add an inch to that measurement, cut the square that size and then cut diagonally. Trim if necessary. Try it with a piece of paper first so that you don't waste more fabric.
Oh, and it is a beautiful pattern!
Add an inch to that measurement, cut the square that size and then cut diagonally. Trim if necessary. Try it with a piece of paper first so that you don't waste more fabric.
Oh, and it is a beautiful pattern!
#13
Super Member
Thread Starter
Join Date: Nov 2014
Location: Ontario Canada
Posts: 1,869
Thanks GingerK!!!! I did that BUT I didn't add any extra LOL ... some days the brain functions, other days, not so much!
Here are what the other two colours look like:
[ATTACH=CONFIG]534097[/ATTACH]
Here are what the other two colours look like:
[ATTACH=CONFIG]534097[/ATTACH]
Last edited by MarionsQuilts; 10-25-2015 at 06:59 AM.
#18
Super Member
Join Date: May 2012
Location: S.E. Queensland, Australia
Posts: 1,480
Maybe it's a trick of photography, but in the pic of your blocks the braid on the top right appears to be wider than the lower left. If so you will need to trim so they are even. This would account for the triangles not fitting, and they may need to be cut a bit larger too.
Have marked where your problem seems to me.
[ATTACH=CONFIG]534157[/ATTACH]
Sorry for double post, I did try to delete one
Have marked where your problem seems to me.
[ATTACH=CONFIG]534157[/ATTACH]
Sorry for double post, I did try to delete one
Thread
Thread Starter
Forum
Replies
Last Post
Julie in NM
Pictures
36
03-24-2012 09:26 AM