need help with EQ5
#1
Power Poster
Thread Starter
Join Date: May 2008
Location: FL
Posts: 16,574
Can some one tell me how to add a second border 10" wide with the log cabin pattern like this pic? I got the pattern all done except for the last border and I need it 10" wide. When I add it it keeps adding the R&L borders too and it won't let me get the logcabins in there.
http://www.e-patternscentral.com/det...=392&criteria=
Thanks!
http://www.e-patternscentral.com/det...=392&criteria=
Thanks!
#2
If you create a border with corner blocks, you can place a block in the corner blocks. Next, you need to use your block setting tool and rotate your log cabins as needed. I hope that helps.
( I have EQ6, so it might work differently. It has been awhile since I used EQ5.)
( I have EQ6, so it might work differently. It has been awhile since I used EQ5.)
#6
Member
Join Date: Jan 2010
Posts: 25
Hey, In EQ5,
If you haven't already, go to the "worktable" option (at the top). Check "work on quilt"
then, at the bottom should be some tabs that say, "layout", "borders", "Layer1", etc.
Check the "borders" tab. A box will appear where you can put the number, style and size for the borders.
Put "0.00" in the left and right boxes, and "10.0" in the top and bottom boxes.
You should see them format as you type.
Good luck.
If you haven't already, go to the "worktable" option (at the top). Check "work on quilt"
then, at the bottom should be some tabs that say, "layout", "borders", "Layer1", etc.
Check the "borders" tab. A box will appear where you can put the number, style and size for the borders.
Put "0.00" in the left and right boxes, and "10.0" in the top and bottom boxes.
You should see them format as you type.
Good luck.
#7
Power Poster
Thread Starter
Join Date: May 2008
Location: FL
Posts: 16,574
[quote=kimbie]Hey, In EQ5,
If you haven't already, go to the "worktable" option (at the top). Check "work on quilt"
then, at the bottom should be some tabs that say, "layout", "borders", "Layer1", etc.
Check the "borders" tab. A box will appear where you can put the number, style and size for the borders.
Put "0.00" in the left and right boxes, and "10.0" in the top and bottom boxes.
You should see them format as you type.
Good luck.[/quoTE
It won't let me :(
If you haven't already, go to the "worktable" option (at the top). Check "work on quilt"
then, at the bottom should be some tabs that say, "layout", "borders", "Layer1", etc.
Check the "borders" tab. A box will appear where you can put the number, style and size for the borders.
Put "0.00" in the left and right boxes, and "10.0" in the top and bottom boxes.
You should see them format as you type.
Good luck.[/quoTE
It won't let me :(
#10
Have you saved the quilt already? That may be why it won't let you change any of the previously saved layout...
You might try starting over with the instructions you were given :D:D:D
You might try starting over with the instructions you were given :D:D:D
Thread
Thread Starter
Forum
Replies
Last Post
mamatobugboo
Main
4
06-29-2009 06:32 PM