I love the tube method and use it all the time. It took me a while to get the "hang" of it but I think it makes a stronger binding.
|
Originally Posted by Shelbie
(Post 7575358)
Using this method (the only one that has ever made sense to me) http://piraterodgers.com/tutorials/cbt/cbt-webpage.pdf will make me over 420" of 2 1/2" bias binding from 28" WOF. I can now make this binding in about an hour including pressing. The pictures and instructions are clear and easy to follow and there is no wasted fabric. This PDF is nine pages but if you don't want to read all of her rationale for using this method, the main instructions are on pages 4-7. Try it, you'll like it.
|
Originally Posted by Onebyone
(Post 7575350)
|
Okay, here's an update. Thank you Shelbie! I printed the PDF and followed it to the point of drawing the lines. I then did as PatriceJ mentioned. I drew a couple of partial lines (just an inch or so) on either end of the tube and that was so that I could line the two sides up more precisely. I sewed the seam to make the tube and then used my rotary cutter and a smaller cutting board on my ironing board to cut the spiral. 1 1/2 hours later, the binding is pressed and ready to attach to my quilt!
I think the problems I experienced the first time came from over-handling the fabric--and not knowing my straight of grain from my bias (duh!) Thanks everyone for you comments. I don't know if this is a technique I will use often, but at least I know I can do it if I have to! |
Originally Posted by GingerK
(Post 7575347)
Soooo...I have had a less than productive day. I need to bind a quilt that has a very gentle zigzag edge on two sides. After trying a piece of straight cut binding, I decided it really needed bias binding--something that I rarely use. I went to my Complete Quilter's Guide and read their directions. I then read over notes I had from a recent Guild demo and proceeded to make my 'tube'.
Cut the piece into two triangles--check. Sew them together on the short sides---check. Draw lines...ummm...Draw more lines because the first ones were not on the bias but on the straight--okay finally...check. (lunch break) Line up the two edges and offset by one row....aaand try again....one more time now...yessss!!! and sew--check. Cut and cut and cut some more (I needed 420 inches)and then press in half and press...you get the idea..but check. Okay time to sew it on the front of the quilt and it is going on beautifully. Even the gentle zigzag looks perfect--except for the colour....hmmmm....after 2 1/2 sides I realized that I had not auditioned the binding fabric against all the other fabrics it would touch and I really needed a plain creme to set off all the blocks. Time to unsew....sigh... Okay finally, folks (if you've stuck with me so far) here is my question--Can anyone tell me what the benefit is in going thru all those contortionistic steps to get one continuous piece of binding,rather than just draw the lines, cut the strips and sew them together? I dread going thru this whole thing again tomorrow... |
Originally Posted by Onebyone
(Post 7575350)
|
Donna, I sure hope you can find your way for us. I "searched" Bias and your name, but nothing was found! I'm sue many of us would like to see it!
|
Kitsie do an advanced search with 'bias binding' in the key words box and DonnaPBradshaw in the exact name box.
Honestly, if you are doing the tube thingy, do it the was PatriceJ suggested. It worked a treat! |
http://www.mccallsquilting.com/mccal...uous_bias?bc=c
I hope this link works! It is my favorite way to make continuous bias binding. Her instructions are so detailed and there is a chart to tell you the size fabric square needed for the width and length of binding you need. I have the video bookmarked and just play it and follow each step. |
I'm a fan of the tube method, better than sewing all those seams together. (for me! ) To each his own?
|
All times are GMT -8. The time now is 07:48 PM. |