I use "Press and Seal" paper (from the grocery store). It clings to the quilt to mark on it and while quilting. Not too bad to peel off when finished.
|
Originally Posted by DebsShelties
Originally Posted by carolaug
Do the stitches get loose when you pull off the paper?
|
Thanks for the great idea!
|
Originally Posted by MissJMac
Originally Posted by QuiltE
Originally Posted by DebsShelties
At a quilt meeting a month ago, stencils were shown, how to use etc. One method was to trace onto paper (a wax type) then sew on the lines. I have been doing that. When I trace the stencil, I use a foam board and sharpies - keeps the ink on the paper.
Something new for me, I am enjoying getting new stencils for later projects. |
Perforating with a needle takes a long time. I use an "old fashioned" tracing wheel to perforate the paper. It is quick and works well.
|
yes we have it here fabricland has it but its a bit expensive i used it to stablize mt sisters wedding vail when i was embroydering on it.
Originally Posted by QuiltE
Originally Posted by Julie in NM
I buy water soulable interfacing to trace my quilting patterns. Washes away when I wash the quilt.Buy it at JAs
|
I use Golden Threads or white tracing paper on a roll and copy my stencil onto it. FMQ on the lines and then just tear the paper away. Have used this on my DSM for years and very happy with results.
|
Thank you for sharing I try it.
|
Originally Posted by GGJudy
Originally Posted by MissJMac
Originally Posted by QuiltE
Originally Posted by DebsShelties
At a quilt meeting a month ago, stencils were shown, how to use etc. One method was to trace onto paper (a wax type) then sew on the lines. I have been doing that. When I trace the stencil, I use a foam board and sharpies - keeps the ink on the paper.
Something new for me, I am enjoying getting new stencils for later projects. However, I do use it to trace (using a black Sharpie and it works. I pin the paper to the fabric and set the stitch length on "0" which makes the paper tear away easily. |
Originally Posted by DebsShelties
Here are a couple of pics
Now I understand. Great idea! :lol: |
Originally Posted by GGJudy
Originally Posted by ncredbird
I have also traced onto press n seal. It is like saran wrap but tacky. It sticks to most anything and is repositionable. You can see through it and it tears out very easily. Ann in TN
I wanted to say how wonderful this board is that we can bounce all these ideas around. :thumbup: |
Thanks for the tip...I'll try it on a practice piece. (using Freezer Paper)
|
I use the press and seal plastic wrap too, works great and removes with no problems.
|
I use tracing paper and fine point sharpies. The tracing paper is a little expensive but a little goes a long way if you are careful how you use it.
|
This looks like Golden Threads paper to me. It comes off easily after you sew through it.
|
I use that type of paper on knitted fabric I think. I iron it on, stitch and then peel it off and it works very well.
|
Originally Posted by Anna.425
Perforating with a needle takes a long time. I use an "old fashioned" tracing wheel to perforate the paper. It is quick and works well.
|
A big thank you to all who shared their wonderful ideas and thoughs. Have never machine quilted but I do believe I could do it now after all these great tips.
|
And the freezer paper I use is white that looks a bit transparent!
|
I'm going to try this! Thanks for the info.
I have also traced onto press n seal. It is like saran wrap but tacky. It sticks to most anything and is repositionable. You can see through it and it tears out very easily. Ann in TN[/quote] |
Originally Posted by vondae
I use old clothing patterns to draw my stencils on. Pin, quilt and pulls right off.
|
I have tried the paper and the press and seal. Mixed reviews! The press and seal was recommended at a a quilt class I took. Great idea BUT I had a devil of a time getting it out of little spaces (inside of leaves, etc. Also marked the plastic with permanent marker - seemed like a good idea at the time. But this little bit of the plastic stayed under the stitches in places leaving black showing. ;-p It was a MESS! Tried the tissue-type paper with slightly better results though I still have tiny bits of white under some areas. My stitch length is not as great as it should be so when I get tiny stitches, there is more problem getting the paper out. I purchased some of the wash-away in a roll (took out a loan-tee hee) and it will be my next experiment. Will continue to watch this thread for more suggestions.
|
Thanks for the tip. I am going to try this tonight.
|
Originally Posted by Julie in NM
I buy water soulable interfacing to trace my quilting patterns. Washes away when I wash the quilt.Buy it at JAs
Thanks. |
Originally Posted by ncredbird
You can do the same procedure that you are using with sewing the design without thread to perforate. Instead of sewing over it use it as a stencil. Lay it on your quilt where you want the design, pounce chalk or baby powder over it, working it into the holes and you have a reusable stencil.
I have also traced onto press n seal. It is like saran wrap but tacky. It sticks to most anything and is repositionable. You can see through it and it tears out very easily. Ann in TN |
Originally Posted by paulswalia
Originally Posted by Julie in NM
I buy water soulable interfacing to trace my quilting patterns. Washes away when I wash the quilt.Buy it at JAs
|
I'm going to bookmark this.
|
[quote=Julie in NM]I buy water soulable interfacing to trace my quilting patterns.
I went to JA's and they have a product called Wash-n-Go and a product and 2 different water soluble stabilizers. Can go give us a little more info which you used? Thanx, Robin in TX |
[quote=Julie in NM]I buy water soulable interfacing to trace my quilting patterns.
I went to JA's web site and they have a product called Wash-n-Go and a product and 2 different water soluble stabilizers. Can go give us a little more info which you used? Thanks, Robin in TX Sorry for the double post. This thing is running too slow tonight |
I tried glad press n seal and found it a bit difficult to remove.
Now, I xerox on my home printer the pattern/design onto xerox paper. I use straight pins to hold it onto the queen size quilt I am quilting on my home machine. It removes easily unless my stitches become too small. I think I will try the tracing wheel to premark with the little holes. Great ideas here! |
Have you thought about using Onion Skin paper? It's thin, just 8 or 9 lbs weight, VS 18 to 20 lbs. weight for regular copy machine paper. Yet it's strong too, so it will go through a regular copy machine without problems, and will not tear if you're copying on it. It's what I use, and then I just pin it to the fabric, stitch away, (smaller stitches), and it tears away easily. Any problem spots and a dab of water with a Q-tip, wait a minute, and it comes right off. Love the stuff! Here's one source, although I'm sure you can find it at your local Office Max or Staples:
http://www.thepapermillstore.com/pap...-per-ream.html Another thing I have done is copied it onto regular copy paper, and then used my rotary perforator to make a grid of perforations on the paper. Not quite as good as the onion skin, but will do in a pinch. Really helps to release the paper from the fabric to pre-perforate the paper, or sometimes just the lines, if they're not too intricate. Warmest Regards, |
Oh, and by the way. I don't use ink of any kind. I use either a regular pencil, or the red pencil. No problems with the thread that way.
|
I tried the Press & Seal yesterday and it worked great. It pulled off without any problems and it didn't pull any of the stitches loose. I used a regular ball point pen to transfer the pattern onto the Press & Seal and it didn't transfer onto my fabric.
|
Thanks for the wonderful tip.I wonder if you mist the wax paper, with your water spray bottle, if the paper wont come off easier?I know I'm going to try it, making sure I use the sharpies,so nothing can run.
|
I've heard of some people using the Glad Press n' Seal for their quilting..never tried it myself.
|
I think I can do this.
|
That is a great idea, never thought of that. Will have to give it a try! Thanks!
|
I trace my design on paper and sew through it to quilt my design. Before I sew I use an tracing wheel to perforate the paper so that the threads don't pull when I take off the paper.
|
This gold paper you are using, shown in your photo, looks like it might be architectural dratfing tssue. I've never seen it in a sewing store but you can buy it at any art store in the drafting department. It takes ink very well and is probably strong enough to sew on. A new one for me!
Originally Posted by DebsShelties
(Post 4529772)
I think about the same as this gold paper I am using, got it at a local quilt shop.
It's seethru gold color. Maybe I needed to say freezer type paper? |
Originally Posted by GGinMcKinney
(Post 4555968)
I tried glad press n seal and found it a bit difficult to remove.
Now, I xerox on my home printer the pattern/design onto xerox paper. I use straight pins to hold it onto the queen size quilt I am quilting on my home machine. It removes easily unless my stitches become too small. I think I will try the tracing wheel to premark with the little holes. Great ideas here! |
All times are GMT -8. The time now is 05:14 PM. |