Go to Superior Threads web site, http://www.superiorthreads.com/
and choose the tab that says "education". They have a lot of information on what types of thread to use and even a chart that tells you what thread to use with what needle, etc. The information is useful whatever brand you use. |
Coats and Clark is way too linty for my machines. After reading several thread discussions on here, I decided to try Connecting Threads. I bought 2 small spools and it's less linty and so far my machines like it :)
|
Aurifil, if I want cotton for piecing; seams lie very flat.
Mostly Bottom Line, a very very thin poly thread meant for the bobbin. I use it for everything My Jems will only take it in bobbins; my Bernina1030 takes it top and bobbin. |
i would not pay $70 for 100 spools of thread until I tested it with One spool
|
I think it's more about your machine. My Singer is fine with coats but my pfaff works best with gutterman. I keep some of all of it:)
|
Originally Posted by retired2pa
Coats and Clark is way too linty for my machines. After reading several thread discussions on here, I decided to try Connecting Threads. I bought 2 small spools and it's less linty and so far my machines like it :)
|
Originally Posted by DebraK
Originally Posted by Annaquilts
Guterman and Janome generally do not do well. The thread is good but it is a bit springy and stiff. It seems the machine does not like it. I am a big fan of Aurafill and Mettler.
|
I've used C&C all the years I've been sewing, and never ever had any problems of any kind. I do buy Mettler also, mainly because I like the smaller spools, I can store more. Never had problems with it either. I've also used serger thread when I needed too, no problems with that either. I've used all these on a FW, a Kenmore, and now 2 Janomes.
|
My Pfaff 7570 will take anything I throw at it with no problems. I mostly use Maxilock serger thread for piecing and quilting now. I know some people have said it won't hold up over the years, but I'm not trying to make heirloom quilts.
|
I really like Aurifil thread the best. Get a spool for $10 and it lasts! Otherwise I like the Gutterman thread. Coats and Clark seemed to lint up a lot on my machine.
|
All times are GMT -8. The time now is 06:31 PM. |