Problem with treadle feed dogs
#1
![Default](/images/icons/icon1.gif)
Back in September I posted a question about whether I could use WD-40 to loosen up the screws to adjust the feed dogs on my treadle.
Well, I was able to loosen the screws and raise the "feed bar" slightly, but I still can't get the fabric to feed through. The feed dogs move when the wheel is turned but the fabric doesn't go anywhere.
I'm hoping someone may have a suggestion. My original post with pictures is here: http://www.quiltingboard.com/t-66666-1.htm
Any help would be appreciated. I would love for this to be a working machine...
Well, I was able to loosen the screws and raise the "feed bar" slightly, but I still can't get the fabric to feed through. The feed dogs move when the wheel is turned but the fabric doesn't go anywhere.
I'm hoping someone may have a suggestion. My original post with pictures is here: http://www.quiltingboard.com/t-66666-1.htm
Any help would be appreciated. I would love for this to be a working machine...
#3
![Default](/images/icons/icon1.gif)
Ditto what okiepasor suggested. You probably will get your questions answered and problem solved in the vintage Sewing Machine Shop. Just repost your question there. It is a running dialogue, so just jump right in.
http://www.quiltingboard.com/t-43881-966.htm
http://www.quiltingboard.com/t-43881-966.htm
#4
![Default](/images/icons/icon1.gif)
Good advice. I did try that already... Good news is that a mechanically inclined friend just figured it out for me. Yippee!!! It turns out that the lever that raises and lowers the pressure foot has two different positions for lowering it. Down is for thicker fabric and forward towards the operator is for thinner fabric. The instruction book doesn't mention the "forward" setting at all. Between the two "down" settings and the pressure screw at the top, the machine should accommodate a variety of fabric thicknesses. I'll post pictures later in case anyone else has a similar problem.
Originally Posted by okiepastor
`you need t go to the Vintage Sewing Machine Shop here on the board....
Back (i.e. up)
[ATTACH=CONFIG]187652[/ATTACH]
Down (for thicker fabrics)
[ATTACH=CONFIG]187653[/ATTACH]
Forward (still "down" but for thinner fabrics)
[ATTACH=CONFIG]187655[/ATTACH]
#6
![Default](/images/icons/icon1.gif)
Yes, I'm really thrilled! I'm so looking forward to sewing with her. I guess I'll have to name her now :D
Originally Posted by sueisallaboutquilts
Great news!! That treadle wants to work again!!!!!!!! :D:D
Thread
Thread Starter
Forum
Replies
Last Post
4dogs
For Vintage & Antique Machine Enthusiasts
11
04-30-2012 05:54 AM
ButtercreamCakeArtist
Main
47
09-17-2007 05:49 PM