Question about a Horn Sewing Cabinet
08-11-2013, 07:37 AM
#11
Super Member
Thread Starter
Join Date: Oct 2010
Location: Royse City Texas
Posts: 2,870
Do you know which cabinet it is? There looks as if a piece of metal that pulls out from right side of top draw. Then it looks as is something fits into the top of the door also on the left.
With the cabinet number or name you could definately get help.
Quick thought looking at cabinet again. Will the door open wider tobe level with rest of cabinet . And will the door fit at the end of the cabinet left side onto the door . Then a leg could be missing.
With the cabinet number or name you could definately get help.
Quick thought looking at cabinet again. Will the door open wider tobe level with rest of cabinet . And will the door fit at the end of the cabinet left side onto the door . Then a leg could be missing.
No metal piece to come out above top drawer...there is a magnet to keep the door closed.
The door does open out to be flush with front of cabinet. No legs and it doesn't show any marks like there would have ever been one...that is a big mystery. There is a hole at the bottom of table that I assume held a pull to lift it.
08-11-2013, 08:19 AM
#12
Junior Member
Join Date: Feb 2011
Location: Chester County., PA
Posts: 156
I have a Horn, but a different model.
The shelf on the door on my model lifts up and there is a type of leg that pulls out that the shelf rests on.
Could you post a picture of the shelf that is attached to the door lifted up? I can't figure out what else to suggest to you.
The shelf on the door on my model lifts up and there is a type of leg that pulls out that the shelf rests on.
Could you post a picture of the shelf that is attached to the door lifted up? I can't figure out what else to suggest to you.
08-11-2013, 08:37 AM
#13
Super Member
Thread Starter
Join Date: Oct 2010
Location: Royse City Texas
Posts: 2,870
I have a Horn, but a different model.
The shelf on the door on my model lifts up and there is a type of leg that pulls out that the shelf rests on.
Could you post a picture of the shelf that is attached to the door lifted up? I can't figure out what else to suggest to you.
The shelf on the door on my model lifts up and there is a type of leg that pulls out that the shelf rests on.
Could you post a picture of the shelf that is attached to the door lifted up? I can't figure out what else to suggest to you.
Here are pics of my table held up and under.
08-11-2013, 08:54 AM
#14
Power Poster
Join Date: Feb 2009
Location: home again, after 27 yrs!
Posts: 19,388
yep, something is missing. There are times when I just don't use some parts of cabinets because they just aren't all that easy to use or comfortable. perhaps you have a plastic rolling cabinet of drawers that might fit under that pull up shelf? or can find a piece of wood to use as a prop (a man project). I went through many images of Horn's and didn't see yours. Good luck. (maybe you could rig a new toilet plunger for a shelf stand)...
Last edited by nativetexan; 08-11-2013 at 09:03 AM.
08-11-2013, 09:06 AM
#15
Super Member
Join Date: Oct 2010
Location: Virginia
Posts: 1,355
I found a photo of a Horn cabinet just like yours on eBay. It appears there is a part missing from your cabinet. It is the second picture down on this page: http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40
Maybe you can contact the person you bought it from and ask if there is another piece, or contact Horn and ask if they sell replacement parts. Hope this helps.
Maybe you can contact the person you bought it from and ask if there is another piece, or contact Horn and ask if they sell replacement parts. Hope this helps.
08-11-2013, 09:13 AM
#16
Super Member
Thread Starter
Join Date: Oct 2010
Location: Royse City Texas
Posts: 2,870
I found a photo of a Horn cabinet just like yours on eBay. It appears there is a part missing from your cabinet. It is the second picture down on this page: http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40
Maybe you can contact the person you bought it from and ask if there is another piece, or contact Horn and ask if they sell replacement parts. Hope this helps.
Maybe you can contact the person you bought it from and ask if there is another piece, or contact Horn and ask if they sell replacement parts. Hope this helps.
THANK YOU THANK YOU! That is it....and now I understand what is missing...I think my husband can make that piece. I never thought of it looking like that.
Nativetexan....I love your idea of a plunger for a leg too! You all have good imaginations...Thanks again for all you ideas and suggestions...brain storming does work.
Thread
Thread Starter
Forum
Replies
Last Post
