Question about trimming before adding binding
10-05-2011, 06:31 AM
#41
Super Member
Join Date: Apr 2011
Location: SW Ohio
Posts: 2,103
Originally Posted by MTS
Originally Posted by SandyinZ4
Originally Posted by auntpiggylpn
You should leave at least a 1/4" of the batting sticking out from the top. This will help "stuff" the binding and make it firmer. Judges at quilt shows will look for a nice stuffed binding. Plus, if you don't have have your binding stuffed, it will fold in half and then it will start to wear along the edge and split, especially if it is washed a lot. Many antique quilts have split bindings just because they didn't fill the binding enough and they were used and washed a lot.
I always trim the top/batting/backing even and then attach the binding.
Here are Sharon Schambers video on binding (there are 3 parts):
http://www.youtube.com/watch?v=4PE0Yq9iGlc
http://www.youtube.com/watch?v=u3vHI7rgZpw
http://www.youtube.com/watch?v=W--xgi4nux8
Makes GORGEOUS, stuffed, firm bindings.
10-05-2011, 06:35 AM
#42
Super Member
Join Date: Jun 2011
Location: Illinois
Posts: 9,018
I watched the SS video and it was very informative, I find I was doing the binding the same way she does, but I don't use starch or GLUE....just pin or clamp as I go. My question about the glue is this: one would have to wash the quilted item after binding to remove the glue? I don't wash anything I finish........until it gets dirty after using it.....
10-05-2011, 07:17 AM
#44
Super Member
Thread Starter
Join Date: May 2010
Location: Southeast Idaho
Posts: 3,208
Originally Posted by YukonViv
I trim my quilt (front, batting and backing) so I have a nice clean edge to work with. I use the french fold technique for binding. I use a 2 1/4 inch binding, fold in half and then sew my binding to the front of my quilt at 1/4 inch...so that the rough edges of the binding is along the edge of the quilt. Then I fold the my binding towards the back and blindstitch it in place by hand. With this method there is no loose areas in the binding as it's wrapped around the full edge of the quilt.
10-05-2011, 07:19 AM
#45
Senior Member
Join Date: Dec 2010
Posts: 605
Originally Posted by Homespun
I seem to be the lone wolf here. I sew my binding down to the front side of the quilt; then trim and turn over and hand sew binding to the back. My binding is always stuffed.
10-05-2011, 07:25 AM
#46
Senior Member
Join Date: Nov 2008
Location: Minnesota
Posts: 862
I always trimmed the edges first and then read that you get a better result if you attach binding first. So, I tried it on my last quilt. If you have a thin batt, it makes no different, but if you have a thicker batt, your binding is FAR more evenly attached because you aren't struggling with an 'edge' and poofiness. So, my recommendation is if you only use thin batts, continue to trim. If using thicker, then sew binding first, trim, then attach to other side.
10-05-2011, 07:32 AM
#48
Super Member
Thread Starter
Join Date: May 2010
Location: Southeast Idaho
Posts: 3,208
Originally Posted by IAmCatOwned
I always trimmed the edges first and then read that you get a better result if you attach binding first. So, I tried it on my last quilt. If you have a thin batt, it makes no different, but if you have a thicker batt, your binding is FAR more evenly attached because you aren't struggling with an 'edge' and poofiness. So, my recommendation is if you only use thin batts, continue to trim. If using thicker, then sew binding first, trim, then attach to other side.
10-05-2011, 07:58 AM
#49
Member
Join Date: Mar 2011
Posts: 72
The outside edge of my finished pieced top is usually straight, so I NEVER trim until I have my binding sewn on as I want to be sure it is "stuffed". I use a binding only 2 1/4" that is folded in half...not a lot of margin to work with.
10-05-2011, 08:18 AM
#50
Super Member
Join Date: Dec 2010
Location: Monmouth, Oregon
Posts: 5,884
I hand trim as I sew the binding to the back so the batting is a little longer than the front and back fabrics. It does fill the binding better since I started doing it this way!!
Me too!
:thumbup:
Originally Posted by Sadiemae
Originally Posted by tsnana2000
I trim the edges too.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
3
12-25-2010 09:49 PM
