Quilt layering wall-HELPPPP
#41
I have a large piece, what ever the standard size of sturdy insulation. I has a shiny covering on all sides. It was then covered with flannel which was pulled tight and taped down with good old duc tape. The pannel is at least ten years old and has never failed me.
I would consider standing a second beside it if I had the room to lay our multiple quilts or one double size quilt top.
I would consider standing a second beside it if I had the room to lay our multiple quilts or one double size quilt top.
#42
Member
Join Date: Jul 2011
Location: arizona
Posts: 87
3m hook and tape might be one method that way they would be removeable with damage to your wall....i use a picnic table cloth with a flannel backing that way i can take it down and put it away when not in use...which is not very often
#44
Mona202- If you don't want to mount the foam boards permanently on your wall why don't you get the heavy duty velcro made by 3M and use that ? It comes in black and white and if you get the color closest to your wall and put them way up high by the ceiling you can leave that half up and the other half (the sticky one) stays on the board. No one would notice the part left on the wall. Take the board down and store it when finished using it. It will be ready to stick up when you are ready again.
#45
Originally Posted by sewmary
My daughter came up with something that has worked for me. We got two long trim boards, drilled a hole on each end, and use long screws with wing nuts on them. This allows the two boards to clamp together. This is hung from a chain attached to the boards which go through hooks in the wall. I can clamp a piece of insulation board into this and sandwich my quilts. I have even clamped the quilts in themselves and sandwiched the quilts.
#46
I use a regular paper stapler to staple mine to a large wall in my bedroom. I keep that wall free of anything else just for basting quilts even though I only make 3 or 4 a year. When I'm done and pull all the staples out you can't tell they were there. they also don't damage the fabric. I love the idea of using insulation. I could use that area for something else then.
#47
Super Member
Join Date: Feb 2011
Location: Lumby, British Columbia
Posts: 2,769
Originally Posted by GemState
I got flannel backed tablecloth, zigzagged two lengths together and put this on a wall in my garage. It worked great except I had a problem with the spray that went on the floor. I used newspaper on the floor to catch the overspray, but then the newspaper stuck to my feet. I tried an old sheet and that was a little better but still the stickiness on my feet.
Any suggestions?
Any suggestions?
#48
Originally Posted by My time
Originally Posted by GemState
I got flannel backed tablecloth, zigzagged two lengths together and put this on a wall in my garage. It worked great except I had a problem with the spray that went on the floor. I used newspaper on the floor to catch the overspray, but then the newspaper stuck to my feet. I tried an old sheet and that was a little better but still the stickiness on my feet.
Any suggestions?
Any suggestions?
Thread
Thread Starter
Forum
Replies
Last Post