Reminder about sewing over pins
#11
Super Member
Join Date: Apr 2012
Posts: 1,165
Since glues and good glue sticks are now common, I don't sew over pins much any more.
I used to BASTE over pins on the Pfaff 1471,75, and 2170. If you have ever sewn lycra skating outfits or swimwear, you can understand why. Once seam was basted, I'd use the serger.
I used to BASTE over pins on the Pfaff 1471,75, and 2170. If you have ever sewn lycra skating outfits or swimwear, you can understand why. Once seam was basted, I'd use the serger.
#12
Senior Member
Join Date: Jun 2011
Location: Cedar Falls, IA
Posts: 927
My Bernina 440 sews over pins pretty well <grin>. My older 1031 did also. I think the Berninas with the oscillating bobbins (the ones with the 5.5 stitch width maximum) are more robust in that area than the oscillating bobbin systems used on the other Bernina machines.
Pam
Pam
#13
Senior Member
Join Date: Jul 2013
Posts: 343
I have a Bernina technician in the family , and I would get a wrap on the knuckles I sewed over pins
all he says if he had a dollar for every machine he has fixed because of sewing over pin he would be a millionaire .
Not a good idea with any machine . ( and he fixes all brands of machine ).
all he says if he had a dollar for every machine he has fixed because of sewing over pin he would be a millionaire .
Not a good idea with any machine . ( and he fixes all brands of machine ).
#14
Super Member
Join Date: Jun 2012
Location: Sonoma County, CA
Posts: 4,299
I am in the habit of NOT doing that, though, ever since I broke a needle doing that as a teenager - thankfully I was being good and wearing my glasses because I heard the broken-off needle tip go "click!" against my lens when it broke! Yikes!
I use clover clips and glue now anyway, about 90% of the time. I bleed a lot less that way! LOL
#16
Banned
Join Date: Aug 2014
Location: Victorian Sweatshop Forum
Posts: 4,096
#19
Super Member
Join Date: May 2012
Location: Central Wisconsin
Posts: 4,391
I was given those instructions when I bought my Singer 301A in 1956. Sewed over a gazillion pins. Once in a while hit one, and once hit it square in the middle; the needle went right through the pin. The machine was none the worse for wear. Still works like a charm.
#20
Super Member
Join Date: Sep 2012
Location: Homosassa, FL
Posts: 2,267
When I learned to sew almost 60 years ago, sewing over pins was common and done all the time. Of course all machines were mechanical back then. Today I try and be careful and not sew over pins, and as I have a brother SQ9000 I do a lot of sewing on because of the stitches AND lack of room to have more than one machine set up.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
1
01-03-2011 08:06 PM