SCORE!!!
#53
Originally Posted by CoyoteQuilts
I finally went to Harbor Freight tonight.... Of course all you gals talked everybody around me to get there first! I looked and looked, my DH asked about the blades and finally I found where they were SUPPOSE to be! Yep, they were all gone, but the cutter was there..... in the cutter package there are 3 blades, yep 3. It was $3.99. Well, I HAD to have a blade, mine is going skip, skip, skip and frustrating (I dropped it when it was open on a ceramic tile floor). So even though each blade was double what the single blades were it still was lots cheaper than Jo-Anns with a 40% off coupon. Of course I had to get a couple other things..... Did you all know they have a wrist magnet? I thought I'd try that out and see if it will work. Here is a pic of my finds. Just a few cents over 10 bucks!
Thanks for sharing this great find. :thumbup: :thumbup:
#57
Senior Member
Join Date: Aug 2010
Location: Albuquerque NM
Posts: 674
If you have not set your machine up yet and your DH does not have a socket adapters set for his drill get this for him:
http://www.harborfreight.com/3-piece...ons-42191.html
if you are setting your machine up on carpet get 2 sets of these for ease of movement:
http://www.harborfreight.com/magic-m...ers-40071.html
these come in several sizes 4”-6”- 8” ect. They will hold onto your rollers and pins. I took thick floor pad scrubber cut into a circle and glued it to the inside and now I stick my pins in upright, no sticks trying to pick up pins.
http://www.harborfreight.com/catalog...t+screw+holder
more suction cups:
http://www.harborfreight.com/catalog...&q=suction+cup
> Got these for batting
> http://www.harborfreight.com/14-inch...ors-90609.html
> suction cups for rulers
> http://www.harborfreight.com/suction...ase-46900.html
> rotary blades/but the cutter also, replace new blade with your old blade and use it for cutting wraping paper
> http://www.harborfreight.com/catalog...ult/?category=
> s> &q=carpet+blades
>
These mag were 3/8”x7/8”x1-7/8” when I got mine. Each time I go in they have a new shipment different sizes and prices.
http://www.harborfreight.com/10-piec...scs-98405.html
these mag were larger before
http://www.harborfreight.com/catalog...=earth+magnets
mag wrist band
http://www.harborfreight.com/magneti...and-96533.html
pick up threads
http://www.harborfreight.com/sanding...ner-30766.html
very good ripper cheap.
http://www.valleyvet.com/ct_detail.h...2-00b0d0204ae5
:lol:
http://www.harborfreight.com/3-piece...ons-42191.html
if you are setting your machine up on carpet get 2 sets of these for ease of movement:
http://www.harborfreight.com/magic-m...ers-40071.html
these come in several sizes 4”-6”- 8” ect. They will hold onto your rollers and pins. I took thick floor pad scrubber cut into a circle and glued it to the inside and now I stick my pins in upright, no sticks trying to pick up pins.
http://www.harborfreight.com/catalog...t+screw+holder
more suction cups:
http://www.harborfreight.com/catalog...&q=suction+cup
> Got these for batting
> http://www.harborfreight.com/14-inch...ors-90609.html
> suction cups for rulers
> http://www.harborfreight.com/suction...ase-46900.html
> rotary blades/but the cutter also, replace new blade with your old blade and use it for cutting wraping paper
> http://www.harborfreight.com/catalog...ult/?category=
> s> &q=carpet+blades
>
These mag were 3/8”x7/8”x1-7/8” when I got mine. Each time I go in they have a new shipment different sizes and prices.
http://www.harborfreight.com/10-piec...scs-98405.html
these mag were larger before
http://www.harborfreight.com/catalog...=earth+magnets
mag wrist band
http://www.harborfreight.com/magneti...and-96533.html
pick up threads
http://www.harborfreight.com/sanding...ner-30766.html
very good ripper cheap.
http://www.valleyvet.com/ct_detail.h...2-00b0d0204ae5
:lol:
#60
Super Member
Join Date: Aug 2010
Location: Kentucky live in WV
Posts: 8,483
I stopped in HF on Saturday in WV and the back order carpet blades were "waiting for me." I did leave some for others. I also bought the mini suction cup but haven't had time to open or try this one. I thought may be I had made a mistake and needed the large handle suction tool. Glad to see others are trying the mini one. I feel better.
Thread
Thread Starter
Forum
Replies
Last Post