Squaring up
#1
Super Member
Thread Starter
Join Date: Mar 2016
Posts: 2,891
Squaring up
I'm squaring up some blocks. I had hoped to get them to 12 1/4. I have a couple that won't make it. It looks like it will be at least 12 1/8. (Still have some to go) Would you just round off to 12"? (It's a Dresden Plate, so I'm only reducing the white that's it's appliqued to.) I have not cut the sashing, so I can add 1/4" there.
bkay
bkay
#3
Super Member
Join Date: Jan 2015
Posts: 2,867
12" sounds like the best solution. Maddening, isn't it when this happens. You're lucky you can do it that way. I made nine patches on a different machine and they came up short. The snowball blocks they will be sewn to were already finished so there was nothing to do but start over. Eventually I will have two quilts when I planned on one.
#5
Super Member
Thread Starter
Join Date: Mar 2016
Posts: 2,891
One other question
I was thinking 12" would be easier. On the other hand, It's the same ruler, so it should not make any difference. I guess it's all in my head. Probably 1/8" won't make any difference. I guess 12 1/8" seems harder than 12".
I've had these squares a while. I bought them in an estate sale last year. I've been reluctant to cut them (square them up), they are so pretty. (The squares are all completely different colors, although some of the fabrics overlap.)
I'm still a beginner quilter. I'm going to sash them in yellow. My friend said they should have white cornerstones. I'm not sure about the cornerstones, either way.
bkay
[ATTACH=CONFIG]577660[/ATTACH]
[ATTACH=CONFIG]577662[/ATTACH]
[ATTACH=CONFIG]577663[/ATTACH]
I've had these squares a while. I bought them in an estate sale last year. I've been reluctant to cut them (square them up), they are so pretty. (The squares are all completely different colors, although some of the fabrics overlap.)
I'm still a beginner quilter. I'm going to sash them in yellow. My friend said they should have white cornerstones. I'm not sure about the cornerstones, either way.
bkay
[ATTACH=CONFIG]577660[/ATTACH]
[ATTACH=CONFIG]577662[/ATTACH]
[ATTACH=CONFIG]577663[/ATTACH]
#6
Power Poster
Join Date: Apr 2011
Location: Ontario, Canada
Posts: 17,827
It's always nice to get a treasure like this.
Agree, trim to 12" ... will be much easier for the math when you go to do your sashings, than to be dealing with a pesky 1/8"!
However ... in trimming, watch that you still have the 1/4" seam allowance available, so you will not be stitching into the plates when you put it together. In that case, you might sooner leave a couple out of the quilt.
Sashings don't have to have cornerstones ..... you could do them totally in yellow.
Or perhaps, you might find a print that would be quite effective.
Agree, trim to 12" ... will be much easier for the math when you go to do your sashings, than to be dealing with a pesky 1/8"!
However ... in trimming, watch that you still have the 1/4" seam allowance available, so you will not be stitching into the plates when you put it together. In that case, you might sooner leave a couple out of the quilt.
Sashings don't have to have cornerstones ..... you could do them totally in yellow.
Or perhaps, you might find a print that would be quite effective.
#9
Super Member
Join Date: Jan 2015
Posts: 2,867
After seeing how close that purple one is to the edge, I'd go with the extra 1/8". If you have to sew the seam less than 1/4" to avoid stitching into the plate, set your stitch length down. I have even double stitched, but I'm sure that's frowned upon because it adds more thread and may not press as flat. Yellow sashing will be fine unless you feel a need to play with cornerstones. Personally, I find them a bother to line up perfectly.
#10
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,660
After seeing how close that purple one is to the edge, I'd go with the extra 1/8". If you have to sew the seam less than 1/4" to avoid stitching into the plate, set your stitch length down. I have even double stitched, but I'm sure that's frowned upon because it adds more thread and may not press as flat. Yellow sashing will be fine unless you feel a need to play with cornerstones. Personally, I find them a bother to line up perfectly.
I noticed how close those plates are to the edge, too.
It looks like the maker did not center the plates on her backing pieces.
Thread
Thread Starter
Forum
Replies
Last Post