Strengthening a Bag
#1
Senior Member
Thread Starter
Join Date: Feb 2015
Posts: 410
Strengthening a Bag
I have made a particular bag a few times with canvas, and I want to make the same bag with one of my cotton prints, but I am worried it might not be strong enough. Is there a good way to strengthen the bag? I was thinking of ironing on some fusible interfacing, but was wondering if that would be weird to have that as the inside of the bag. Using two layers of fabric might work, but I’m not sure how hard that would be to work with since it would mean I would be sewing four layers of fabric together.
#2
They make different thicknesses of fusible interfacing that I've had good luck with for cotton totes. It won't show as it will be between the 2 layers of cotton. I don't think just using 2 layers of cotton is what you want. Too flimsy
#3
Power Poster
Join Date: Jan 2011
Location: Southern USA
Posts: 16,515
Are you making a tote, drawstring, carry on or cosmetic type bag? I put the straps vertically around and under the tote to make it stronger. I always line my bags so I use two layers of fabric. Sometimes with batting or interfacing between the fabric and lining.
#5
Senior Member
Thread Starter
Join Date: Feb 2015
Posts: 410
It's a tote bag, and it actually has webbing around the underside, but I'm still concerned that the fabric will rip if whatever's in the bag applies pressure to it.
#6
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,666
Then use something like heavy-weight denim, or rip-stop nylon, or the type of fabric used in Carhartt garments.
#7
Senior Member
Thread Starter
Join Date: Feb 2015
Posts: 410
Thanks for all the replies. A heavier or stronger fabric is definitely safer, but they don't come in as many adorable cat and dog prints.
Interfacing is probably the way to go if I want to use the fabric I have in mind. The other thing I could do is use canvas and then applique a design on it. Then the only tricky part is coming up with the applique design.
Interfacing is probably the way to go if I want to use the fabric I have in mind. The other thing I could do is use canvas and then applique a design on it. Then the only tricky part is coming up with the applique design.
#10
When I made my tote with the pet mesh, you use it for the whole bag but piece the cotton onto it in some places, so it makes a strong bag. Here is a link that shows the supply list for it, and you can see they don't use any interfacing or batting. https://www.google.ca/search?q=tote+...TZ8GDgC-zeDGM:
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
1
09-12-2011 01:02 PM
heather_campbell
Links and Resources
19
05-27-2010 12:03 PM