Go Back  Quiltingboard Forums >
  • Main
  • Thread Bare Batting??? >
  • Thread Bare Batting???

  • Thread Bare Batting???

    Thread Tools
     
    Old 07-27-2010, 07:18 AM
      #1  
    Junior Member
    Thread Starter
     
    rebeccalr's Avatar
     
    Join Date: Jul 2010
    Location: Watertown, TN
    Posts: 227
    Default

    Okay, so I laid out my first quilt for my sandwich and was very disappointed in the batting. It was paper thin in some places, but I went ahead and made my sandwhich and have spent hours handquilting on a couple of the squares. I thought "when it is washed it will probably fluff up". Now I am doubting myself. I paid close to $40 for the batting at JoAnn's, so I figured it was fine. What do y'all think? Should I rip it apart and start over?

    I have added a picture of the batting bag. I didn't think about telling what kind it was. 100% cotton, loft height <1/4", no scrim, unbleached, bonded.

    picture of bag
    [ATTACH=CONFIG]70098[/ATTACH]
    Attached Thumbnails attachment-70093.jpe  
    rebeccalr is offline  
    Old 07-27-2010, 07:20 AM
      #2  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    What is the brand name of the batting? And any other info on the batting wrapper would be helpful too.
    Prism99 is offline  
    Old 07-27-2010, 07:26 AM
      #3  
    Senior Member
     
    jlong's Avatar
     
    Join Date: Jul 2010
    Location: Reading, PA
    Posts: 443
    Default

    I bought a brand other than warm and natural at Joannes once and it did okay because it was a flannel quilt. I would never buy it again because it was very thin. I'm not sure what you should do next. But this is a great place for quilting assistance.
    jlong is offline  
    Old 07-27-2010, 07:29 AM
      #4  
    Moderator
     
    kathy's Avatar
     
    Join Date: Nov 2006
    Location: on the Texas Coast
    Posts: 4,020
    Default

    if I was going to the time to hand quilt it I would be sure I had a good batting, even if that means taking it out and starting over. You may be right, it may fluff up but what if it doesn't? how important is the project?
    kathy is offline  
    Old 07-27-2010, 07:36 AM
      #5  
    Junior Member
    Thread Starter
     
    rebeccalr's Avatar
     
    Join Date: Jul 2010
    Location: Watertown, TN
    Posts: 227
    Default

    It is for my inlaws as a thank-you for an all expense paid vacation this summer!!!
    rebeccalr is offline  
    Old 07-27-2010, 07:44 AM
      #6  
    Power Poster
     
    amma's Avatar
     
    Join Date: Jul 2007
    Location: Out searching for some sunshine :-)
    Posts: 58,856
    Default

    If it has bare spots now, it will most likely have bare spots after it is washed.... They may even become more noticable after washing :(
    amma is offline  
    Old 07-27-2010, 07:57 AM
      #7  
    Senior Member
     
    Hinterland's Avatar
     
    Join Date: Oct 2009
    Location: Hudson Valley, NY
    Posts: 939
    Default

    Originally Posted by rebeccalr
    It was paper thin in some places, but I went ahead and made my sandwhich and have spent hours handquilting on a couple of the squares. I thought "when it is washed it will probably fluff up". Now I am doubting myself. I paid close to $40 for the batting at JoAnn's, so I figured it was fine. What do y'all think? Should I rip it apart and start over?
    I would take out the quilting and bring the batting back to JoAnn's. If they don't make good on it, then write a letter to Fairfield Processing and see if they will do something about it. I've never used this batting, but it shouldn't have thick and thin spots in it.

    I wouldn't spend the time hand quilting a king-size project feeling unsure if the batting will hold up.
    Hinterland is offline  
    Old 07-27-2010, 08:03 AM
      #8  
    Senior Member
     
    mlaceruby's Avatar
     
    Join Date: Jun 2010
    Location: Somerset PA
    Posts: 719
    Default

    I wouldn't use it either!
    It most likely will get worse!
    mlaceruby is offline  
    Old 07-27-2010, 08:03 AM
      #9  
    Power Poster
     
    Join Date: Nov 2007
    Location: SW Iowa
    Posts: 32,855
    Default

    If the batting doesn't feel right now it most likely won't feel right when it is washed. I would tear it out and return that batting.
    littlehud is offline  
    Old 07-27-2010, 08:10 AM
      #10  
    Power Poster
     
    Join Date: Dec 2008
    Location: Western Wisconsin
    Posts: 12,930
    Default

    Okay, that is a very traditional batting -- the type that antique quilts were made with. When you wash the quilt, the whole quilt will softly crinkle. This is the look you get with traditional batting. I personally love this look.

    This type of batting is going to be thin (package says 1/4" loft, which is thin) and look as if it has thick and thin spots. There is nothing wrong with the batting; this is traditional batting. The "cotton classic" in the name indicates this. Fairfield is a reputable brand.

    How hard is it to hand quilt? The batting I usually use is Mountain Mist Blue Ribbon cotton batting, which is a traditional batting similar to the one you purchased (but *much* less expensive, I think!). It was hard to hand quilt because there is so much drag on the needle. Quilters Dream Request is supposed to be much easier to hand needle; not sure if it crinkles up the same way when washed, though, as I haven't used it. Quilters Dream is a newer manufacturer of batting, and theirs is needlepunched. Fairfield and Mountain Mist have been in business for many decades; their "classic" battings are traditional battings.

    If you prefer a high-loft, more modern, comforter type look, the batting you are using will not give you that.

    Personally, I would just finish hand quilting with this batting and then wash the quilt. I love the way a quilt looks with traditional batting.

    Next time, if you want more fluffiness, try Hobbs Heirloom 80/20. This is a little thicker than a traditional batting, probably easier to hand-needle, and probably closer to the look you were expecting. Most of us are very accustomed to the polyester comforter look these days; the bed coverings we buy from the store are invariably high-loft polyester. Hobb 80/20 is sort of a middle ground between the traditional 100% cotton look and the modern, store-bought 100% polyester look.
    Prism99 is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    libber
    For Vintage & Antique Machine Enthusiasts
    8
    01-22-2012 10:40 PM
    deema
    Main
    17
    10-28-2010 08:48 AM
    Pzazz
    Pictures
    43
    05-17-2010 09:01 AM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter