Thread question
#41
Junior Member
Join Date: Jun 2009
Location: Kansas
Posts: 211
Glazed cotton quilting thread is for hand quilting and not for use in the sewing machine because of it's finish. Don't use the cheapest "4 for $1" type thread. It is made from very short stands of cotton and will cause all sorts of lint in your machine, causing you to clean out the bobbin area many more times than a better quality thread. And you can use cone thread, just get a stand along thread holder to place behind your machine and use the guides to thread the machine. If necessary you can tape a small safety pin on the right upper side of your machine and run the thread through the "hole" in the end of the safety pin to get a straight line for the thread to travel.
I haven't always thought this and some may argue with me, but Bob from Superior Threads gave a demo at a convention that I attended and he had cotton and a cotton poly blend thread strung around the room through every one present. He then had us feel and break the threads. The cotton poly blend actually wasn't as strong as the cotton thread and was easier to break, disproving that cotton poly will cut through the threads of your cotton quilt fabric. I still use cotton thread, Egyptian long staple, when I'm piecing my quilts and also use for the most part cotton thread when I quilt. However I still will use a blend for hand stitching on the binding for the right color, and I use a monopoly clear thread for quilting if I choose. There is wonderful education on threads on Superior Threads web site.
Even if this is your last class, there is enough info for you to keep learning and quilting for a long time.
I haven't always thought this and some may argue with me, but Bob from Superior Threads gave a demo at a convention that I attended and he had cotton and a cotton poly blend thread strung around the room through every one present. He then had us feel and break the threads. The cotton poly blend actually wasn't as strong as the cotton thread and was easier to break, disproving that cotton poly will cut through the threads of your cotton quilt fabric. I still use cotton thread, Egyptian long staple, when I'm piecing my quilts and also use for the most part cotton thread when I quilt. However I still will use a blend for hand stitching on the binding for the right color, and I use a monopoly clear thread for quilting if I choose. There is wonderful education on threads on Superior Threads web site.
Even if this is your last class, there is enough info for you to keep learning and quilting for a long time.
#42
You can set a cone thread inside a glass jar or any container if you do not have way to use cone thread.
DO NOT use the glaced thread on the machine. It contains wax and/or starch. It will flake off and jam your machine.
YLI makes a hand quilting thread that the vendor told me to my face that it could be used on the machine. But I really have my doubts.
You get what you pay for with thread. If you buy good fabric use good thread. It is much cheaper to buy cones. I get mine from Sew Thankful online.
XOXOXO Subee
DO NOT use the glaced thread on the machine. It contains wax and/or starch. It will flake off and jam your machine.
YLI makes a hand quilting thread that the vendor told me to my face that it could be used on the machine. But I really have my doubts.
You get what you pay for with thread. If you buy good fabric use good thread. It is much cheaper to buy cones. I get mine from Sew Thankful online.
XOXOXO Subee
#43
Super Member
Join Date: Nov 2010
Location: SoCal
Posts: 1,813
I have found that the eye of the needle makes a difference depending on the thread used. I found a needle with a longer eye and it made a big difference in free motion quilting. You can even go sideways, slowly, and not nest on the back with those needles.
#44
Originally Posted by stormatsea45
Glazed cotton quilting thread is for hand quilting and not for use in the sewing machine because of it's finish. Don't use the cheapest "4 for $1" type thread. It is made from very short stands of cotton and will cause all sorts of lint in your machine, causing you to clean out the bobbin area many more times than a better quality thread. And you can use cone thread, just get a stand along thread holder to place behind your machine and use the guides to thread the machine. If necessary you can tape a small safety pin on the right upper side of your machine and run the thread through the "hole" in the end of the safety pin to get a straight line for the thread to travel.
I haven't always thought this and some may argue with me, but Bob from Superior Threads gave a demo at a convention that I attended and he had cotton and a cotton poly blend thread strung around the room through every one present. He then had us feel and break the threads. The cotton poly blend actually wasn't as strong as the cotton thread and was easier to break, disproving that cotton poly will cut through the threads of your cotton quilt fabric. I still use cotton thread, Egyptian long staple, when I'm piecing my quilts and also use for the most part cotton thread when I quilt. However I still will use a blend for hand stitching on the binding for the right color, and I use a monopoly clear thread for quilting if I choose. There is wonderful education on threads on Superior Threads web site.
Even if this is your last class, there is enough info for you to keep learning and quilting for a long time.
I haven't always thought this and some may argue with me, but Bob from Superior Threads gave a demo at a convention that I attended and he had cotton and a cotton poly blend thread strung around the room through every one present. He then had us feel and break the threads. The cotton poly blend actually wasn't as strong as the cotton thread and was easier to break, disproving that cotton poly will cut through the threads of your cotton quilt fabric. I still use cotton thread, Egyptian long staple, when I'm piecing my quilts and also use for the most part cotton thread when I quilt. However I still will use a blend for hand stitching on the binding for the right color, and I use a monopoly clear thread for quilting if I choose. There is wonderful education on threads on Superior Threads web site.
Even if this is your last class, there is enough info for you to keep learning and quilting for a long time.
I did switch to an all cotton thread and now my machine is "purring"!. I am so unknowledgeale about anything related to sewing that I did not know that glaced thread was forhand quilting only. I know it now!!
Thanks again and have a wonderful blessed day.
#45
Thank you for posting a question about thread. I'm a new quilter and confused about the different types of thread. Polyester or cotton? I have been using polyester w/o any problems, but I heard you should always use cotton thread when quilting. What do you all think?
#46
Member
Join Date: Oct 2010
Location: Milford CT
Posts: 37
I for one am a quilting Purist. I only use 100% cotton thread in quilting. Cotton fabric=Cotton thread. My LQS doesn't like that part as I don't buy my thread from them. They only carry Metler and Coats and Clark. Oh well. I spend a small fortune on fabric there.
#47
Originally Posted by Surfergirl
Thank you for posting a question about thread. I'm a new quilter and confused about the different types of thread. Polyester or cotton? I have been using polyester w/o any problems, but I heard you should always use cotton thread when quilting. What do you all think?
I see by your avatar that you have two Boston Terriers! I do also!!! Their names are Willie Nelson and Waylon Jennings. I got the first almost 3 years ago and the second almot 2 years ago. They saved me from the initial "what do I do now" ofa forced retirement!!! Love them!
:lol:
Thread
Thread Starter
Forum
Replies
Last Post
CorgiNole
Main
16
06-12-2010 01:38 PM