Turned vs Raw Edge Applique
#21
Super Member
Join Date: Mar 2016
Posts: 2,867
![Default](/images/icons/icon1.gif)
Somehow, that never occurred to me.
bkay
#22
Senior Member
Thread Starter
Join Date: Feb 2013
Location: East Kootenays, BC
Posts: 947
![Default](/images/icons/icon1.gif)
That would have been awesome. Her work is beautiful.
#23
Super Member
Join Date: Aug 2018
Location: Greater Peoria, IL -- just moved!
Posts: 6,141
![Default](/images/icons/icon1.gif)
Tiny little stitches with a thinner needle than I generally use for piecing. Trimming is also really important, clip down to the seam line at sharp angles.
You also need a couple of handy "tools" that can be knitting needles or those orange sticks for manicures to help turn the seams and keep the points or curves or whatever crisp. You want something that you can maneuver around but not too sharp so you go through the seams. Nice thing with the flip over technique is you can cut the slit really big/side to side even and get in there for the proper shapes.
My friend that I learned from was a big believer in silk thread for hand stitching down the sides and she used an Ott light both for good color match and to help her see. With my vision issues I find the Ott light necessary for my hand stitching of bindings which is about all I do in terms of handwork, I use a big needle and don't think I could even thread one of her hand stitching needles, probably can't even see a single thickness of that thread any more for that matter!
I had another friend who used to make simply glorious appliqued wall art using the mono-filament clear thread and the smallest zigzag her machine had. At least back then that didn't wash well and didn't iron at all (melts!), but I was in awe of her abilities.
You also need a couple of handy "tools" that can be knitting needles or those orange sticks for manicures to help turn the seams and keep the points or curves or whatever crisp. You want something that you can maneuver around but not too sharp so you go through the seams. Nice thing with the flip over technique is you can cut the slit really big/side to side even and get in there for the proper shapes.
My friend that I learned from was a big believer in silk thread for hand stitching down the sides and she used an Ott light both for good color match and to help her see. With my vision issues I find the Ott light necessary for my hand stitching of bindings which is about all I do in terms of handwork, I use a big needle and don't think I could even thread one of her hand stitching needles, probably can't even see a single thickness of that thread any more for that matter!
I had another friend who used to make simply glorious appliqued wall art using the mono-filament clear thread and the smallest zigzag her machine had. At least back then that didn't wash well and didn't iron at all (melts!), but I was in awe of her abilities.
#24
Senior Member
Thread Starter
Join Date: Feb 2013
Location: East Kootenays, BC
Posts: 947
![Default](/images/icons/icon1.gif)
I’ve Appliqued with Superior monopoly by machine and a tiny blanket stitch which worked really well. I used the “smoke” colour on darker fabric and it’s nearly invisible. The monopoly is very fine and doesn’t melt as it is polyester, not nylon.
#26
Super Member
Join Date: Nov 2010
Location: Milton DE
Posts: 3,189
![Default](/images/icons/icon1.gif)
Ok I cheat sometimes. I take a light interfacing and sew to the applique piece and then turn inside out and carefully press so as not to have the interfacing show. If its a large piece I cut the middle out of the interfacing and then place the piece and use a blanket stitch to sew it down. No turning (which I'm not good at!) and no fraying.
#28
Super Member
Join Date: Jul 2010
Location: Central Willamette Valley, Oregon, USA
Posts: 7,695
Thread
Thread Starter
Forum
Replies
Last Post
romille
Main
6
05-04-2015 03:25 AM
craftybear
Links and Resources
1
11-13-2010 09:27 PM