Using Heat 'n' Bond
#21
Member
Join Date: Aug 2016
Location: St Augustine,Florida
Posts: 97
![Default](/images/icons/icon1.gif)
I was making some flags for our youth group at church, and used the Ultra hold to put the designs on them, and it worked great,however, I did not have to sew the designs. the Heat&Bond Lite is great for appliques, etc.I use it all the time for baby bibs,etc. hope this helps.
#23
Super Member
Thread Starter
Join Date: May 2012
Location: Central Wisconsin
Posts: 4,391
![Default](/images/icons/icon1.gif)
One by one has a link that shows many different kinds of interfacing.
Also, see Stitchnripper's post above and check out the link.
Apparently my LQS didn't know there were different grades of HeatnBond. They are more of a craft place but sell many things quilters use.
Last edited by maviskw; 04-30-2018 at 06:44 AM.
#24
Super Member
Join Date: Dec 2012
Posts: 1,857
![Default](/images/icons/icon1.gif)
I use heat and bond a lot, but I would not use Ultra on a quilt. It is a bit too stiff for my liking. But, may I ask why you are using a web product rather than a fusible interfacing? Usually you stabilize the T-shirt with a fusible interfacing and then cut out the piece. At this point you use it as if it were a 'regular' piece of fabric.
#25
Super Member
Join Date: Dec 2012
Posts: 1,857
![Default](/images/icons/icon1.gif)
I spent a whole day going thru you tube videos to find decent ones on T-shirt quilt making so I would have something to tell my customers to watch. Most are absolute junk and some even seemed dangerous! But, a very basic one with lots of variations and simple instructions is our old standard - Eleanor Burns Quilt in a Day. Her YouTube video has all the basic info and also how to utilize different sizes (pocket logos, sleeve logos). You do have more than her normal amount of silly talk, but she puts in an awful lot of good instruction in the video.
#26
Super Member
Thread Starter
Join Date: May 2012
Location: Central Wisconsin
Posts: 4,391
![Default](/images/icons/icon1.gif)
I use heat and bond a lot, but I would not use Ultra on a quilt. It is a bit too stiff for my liking. But, may I ask why you are using a web product rather than a fusible interfacing? Usually you stabilize the T-shirt with a fusible interfacing and then cut out the piece. At this point you use it as if it were a 'regular' piece of fabric.
#27
Member
Join Date: Aug 2017
Posts: 28
![Default](/images/icons/icon1.gif)
I'll echo what's been said before. I do a lot of applique quilts and use the Lite version all the time, it's relatively easy to sew through. It leaves the quilt somewhat stiff, but that's not a problem for my wall hangings. I accidentally bought the Ultra one time and I'm still trying to use it up! Ultra is difficult, but not impossible, to sew through and much thicker than you would need. I've used it occasionally to adhere thick embroidered patches (like Girl Scout badges and the like...). I really should just toss it.
That said though, I agree that for a t-shirt quilt I would recommend fusible stabilizer instead of a product like Heat 'n Bond. Unless you're doing some small appliques on top of the shirts? Anyway, best of luck with your project!
That said though, I agree that for a t-shirt quilt I would recommend fusible stabilizer instead of a product like Heat 'n Bond. Unless you're doing some small appliques on top of the shirts? Anyway, best of luck with your project!
#30
Junior Member
Join Date: Dec 2014
Posts: 157
![Default](/images/icons/icon1.gif)
I used it once on an appliqué for a wall hanging and it was awful! I had to keep cleaning my needle because it would gum up. I don't have any trouble when I use the light weight. I made a t-shirt quilt once, but I used a stabilizer for the back of the shirts.
Thread
Thread Starter
Forum
Replies
Last Post
craftybear
Links and Resources
2
08-04-2011 05:04 AM
craftybear
Links and Resources
5
06-22-2011 09:33 AM
craftybear
Links and Resources
2
06-12-2011 05:42 PM
craftybear
Links and Resources
0
02-05-2011 10:40 PM