A Walking View
#22
I use my walking foot through the whole process of the binding. It is the amount of batting, fabric (bulk) and binding under the foot that requires the need for an even feed foot. Why make it hard on your machine? It is also for the benefit of the motor that you use the walking foot.
The walking foot has markings on the metal to assist you in the turning stopping point. But that being said, I also use a seam guide to mark it with a pin when I come close to the edge where you must turn. Just set the sliding bar on the seam guide to the measured seam size and then it is where you need to mark or pin to have a perfect place to stop when you are close to the edge where you must turn. Make sense?
The walking foot has markings on the metal to assist you in the turning stopping point. But that being said, I also use a seam guide to mark it with a pin when I come close to the edge where you must turn. Just set the sliding bar on the seam guide to the measured seam size and then it is where you need to mark or pin to have a perfect place to stop when you are close to the edge where you must turn. Make sense?
Last edited by RedGarnet222; 07-14-2019 at 12:25 PM.
#23
Senior Member
Join Date: Feb 2010
Location: Reno, Nevada
Posts: 794
I use my walking foot for about 90% of my sewing, and find it especially important for machine-applied binding. However, it is difficult to line up for close-to-edge quilting under the wide foot. Here's how I solved the dilemma and kept the advantage of the foot evenly moving all those layers of fabric and I get a hair's breadth near the folded edge of the binding:
Align all layers of fabric beneath the wide foot which ensures that not only both under feed dogs will get a good "grab" on the fabric, but so will the dogs on the walking foot. However, that leaves the needle not very close to the folded edge of the binding. So, simply adjust your needle to the side (width adjustment) and keep the folded edge lined up with the left-most edge of the walking foot. Works every time for me.
Hope this helps.
Align all layers of fabric beneath the wide foot which ensures that not only both under feed dogs will get a good "grab" on the fabric, but so will the dogs on the walking foot. However, that leaves the needle not very close to the folded edge of the binding. So, simply adjust your needle to the side (width adjustment) and keep the folded edge lined up with the left-most edge of the walking foot. Works every time for me.
Hope this helps.
#27
When binding (yeah, I’m still on that), how far into the process is the walking foot necessary? I attach the binding to the quilt with my walking foot but is the walking foot still necessary after that? Can I switch to a different foot when sewing the already-attached binding to the front?
My walking foot is pretty big with wide presser feet and the view is really obstructed when trying to sew close to the edge of the binding on the front.
My walking foot is pretty big with wide presser feet and the view is really obstructed when trying to sew close to the edge of the binding on the front.
#28
Power Poster
Join Date: Jul 2009
Location: Between the dashes of a tombstone
Posts: 12,716
I don't own a walking foot, but use one at work...I don't care for it...obstructs my view. I've made 100's of quilts of my own from tiny to queen size and have never used one for binding.
Thread
Thread Starter
Forum
Replies
Last Post
quiltswithdogs
Pictures
47
07-04-2011 07:09 PM