What the HECK Is the Secret?!?!?
#13
I don't know how you managed those eyes, but they are way too cute! The owl is so whimsical that the eyes look perfect like they are! Love them!!
I'm making these little stuffed owls to give as gifts to the kids in my family. The pattern calls for you to set your machine to a short zig-zag stitch to go around the eyes, around the white of the eyes, and around the beak and wings. I can't get the !)@(#*$&%^ machine to go where I want it to go around those tight little circles for nothin'! :c(
Donna
Donna
#14
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,548
If you have a needle down function on your machine, it's a life saver on machine applique. It allows you to raise the presser foot and reposition the fabric as needed. Stop with the needle down on the outside side of the circle to reposition. Have you thought about doing a simple staight stitch about 1/8 in from the eyeball edge and allowing the edge to fray like in raw edge applique. It would be easier I think. If button eyes are put on make sure they are small to not pose a choking hazard for small children.They do look very cute!
#15
Junior Member
Join Date: Apr 2009
Posts: 203
Seeing what you are making, I would be tempted to straight stitch about an 1/8 in from the edge of the fabric circles and let it ravel out on both circles for the eyes and the same for the nose. Would make it look like lashes.
There are attachments that you can purchase for your machine to sew circles. I have also seen where someone used a thumbtack through a piece of tape, then taped to the bed of the machine so it is set up so the center of the circle is positioned on the pointed part of the tack and taped to the machines so the needle goes through the fabric an 1/8 in from the edge or what ever seam allowance you want. Hope this makes sense.
I must have been typing the same thing at the same time Tartan was.
There are attachments that you can purchase for your machine to sew circles. I have also seen where someone used a thumbtack through a piece of tape, then taped to the bed of the machine so it is set up so the center of the circle is positioned on the pointed part of the tack and taped to the machines so the needle goes through the fabric an 1/8 in from the edge or what ever seam allowance you want. Hope this makes sense.
I must have been typing the same thing at the same time Tartan was.
Last edited by one-and-only; 12-09-2011 at 04:38 PM.
#19
Senior Member
Join Date: May 2011
Location: Waynesboro, Tn.
Posts: 932
Donna, this is what I do, draw your pattern on the fabric, do not cut it out,cut out all your appliques,place them on the pattern that you drew and glue them in place with glue stick, let dry then cut your pattern out, but not on the lines, in a large enough square that you can handle it as you zig-zag it on your machine. when all applique is done, I press the pattern piece, then cut it on the pattern lines and go from there.
#20
Senior Member
Join Date: Jun 2011
Posts: 976
I use flat metal washers, there are mylar products too that are flat circles, the hint is to pink your edge, this will reduce bulk which causes the crease.
Cut circle 1/4" larger than your washer, pink edge, spray starch, iron around washer, remove washer, repress.
Cut circle 1/4" larger than your washer, pink edge, spray starch, iron around washer, remove washer, repress.
Thread
Thread Starter
Forum
Replies
Last Post
hav4boys
Member Swaps and Round/Row Robins
96
10-30-2018 05:42 PM
charmpacksplus
Links and Resources
0
10-30-2010 01:24 PM
craftybear
General Chit-Chat (non-quilting talk)
9
09-21-2010 07:24 PM