When quilting a large quilt...
#11
Power Poster
Join Date: May 2010
Location: Bakersfield, CA
Posts: 13,214
Originally Posted by Crlyn
Originally Posted by np3
Originally Posted by BKrenning
You would quilt 3 separate quilts to within 1/2 inch from where they are to be joined. After all the sections are quilted, you join them together and use a sashing strip to hide the seam on the back. Search Quilt as You Go for a block by block style or even Quilting in Sections and you should find examples of what it looks like. You only have the entire quilt on the machine when you are putting the sections together and of course putting the binding on.
Sharon Pederson & pair of ladies I forgot the names of did episodes on Simply Quilts years ago and I'm sure there are others. Check YouTube for videos.
I have quilted block by block which is very similar to the quilting in sections & it was very easy. I quilted each block and then used sashing front & back to put them together row by row. It was a lot of hand sewing on the back to finish but if you use a matching thread color, you could probably machine finish it easily enough. I was a new quilter at the time so I followed the directions I had seen.
Sharon Pederson & pair of ladies I forgot the names of did episodes on Simply Quilts years ago and I'm sure there are others. Check YouTube for videos.
I have quilted block by block which is very similar to the quilting in sections & it was very easy. I quilted each block and then used sashing front & back to put them together row by row. It was a lot of hand sewing on the back to finish but if you use a matching thread color, you could probably machine finish it easily enough. I was a new quilter at the time so I followed the directions I had seen.
It is easier when you do the middle section. The last section is just as bulky. The key is having a really big work space. The method lessens the amount of quilt rolled up in the throat of your machine.
You know what has me confused now, is how do you only sandwich the first strip down the centre with all the other fabric of the top and backing on each side?
#12
Originally Posted by jlong
Prism99 suggested this and I did it on my avatar Steeler picture.
You can also split the quilt into 3 parts (without the division showing later) to make the bulk easier to handle. To do this, you layer the sandwich as usual, pin back a third of the top and backing fabric so it is out of the way, then cut the batting only in large S-shaped curves. Mark both sides of the cut so it is easy to reposition the two pieces later. (The curving cutting line helps with the repositioning later and also hides the join.) Pin the top to the backing fabric. Do the other side of the quilt the same. Machine quilt the middle section, leaving a good 4 inches or so free near the cut edges. When the middle is done, re-attach one side of the batting with hand tailor tacks (or some people do it with a long and wide machine zigzag) and re-position the top and backing over that section. Complete the machine quilting on that side. Repeat with the other side. Marti Michel has a book on how to do this, but I first saw this process described in detail in another book by another quilter (whose name escapes me at the moment).
You can also split the quilt into 3 parts (without the division showing later) to make the bulk easier to handle. To do this, you layer the sandwich as usual, pin back a third of the top and backing fabric so it is out of the way, then cut the batting only in large S-shaped curves. Mark both sides of the cut so it is easy to reposition the two pieces later. (The curving cutting line helps with the repositioning later and also hides the join.) Pin the top to the backing fabric. Do the other side of the quilt the same. Machine quilt the middle section, leaving a good 4 inches or so free near the cut edges. When the middle is done, re-attach one side of the batting with hand tailor tacks (or some people do it with a long and wide machine zigzag) and re-position the top and backing over that section. Complete the machine quilting on that side. Repeat with the other side. Marti Michel has a book on how to do this, but I first saw this process described in detail in another book by another quilter (whose name escapes me at the moment).
#13
[quote=np3][quote=Crlyn][quote=np3]
You still roll the top and the backing up the way you would if the batting was inside. The advantage is that it is a smaller "piece" to manage. It doesn't get heavy and in your way.
I get what you mean there, do you sandwich the whole batting first THEN cut it. I'm having trouble trying to explain my dilemma. When I sandwich a quilt I usually tape each corner of the backing then the same with the batting and top, so how do I go about doing just down the centre.........I expect thats all clear as mud ! .... sorry!!
:D
Originally Posted by BKrenning
You still roll the top and the backing up the way you would if the batting was inside. The advantage is that it is a smaller "piece" to manage. It doesn't get heavy and in your way.
:D
#14
Power Poster
Join Date: May 2010
Location: Bakersfield, CA
Posts: 13,214
[quote=Crlyn][quote=np3][quote=Crlyn]
You still roll the top and the backing up the way you would if the batting was inside. The advantage is that it is a smaller "piece" to manage. It doesn't get heavy and in your way.
I get what you mean there, do you sandwich the whole batting first THEN cut it. I'm having trouble trying to explain my dilemma. When I sandwich a quilt I usually tape each corner of the backing then the same with the batting and top, so how do I go about doing just down the centre.........I expect thats all clear as mud ! .... sorry!!
:D
I need to search for the tute on this, it would help you.
You have to make the sandwich so you know how big to cut it. And when you cut the pieces off, you need to make a note of which edges were cut from where. That will help you when you put them back together (butt them up and stich them by hand or zigzag, never overlapping.)
You want to pin it well through the center then roll the front and back out of the way and cut the batting. Be very careful not to cut the front or back!!!
Then when you do the sides, the center is stable because it is already quilted and you pin/baste the first side.
Originally Posted by np3
Originally Posted by BKrenning
You still roll the top and the backing up the way you would if the batting was inside. The advantage is that it is a smaller "piece" to manage. It doesn't get heavy and in your way.
:D
You have to make the sandwich so you know how big to cut it. And when you cut the pieces off, you need to make a note of which edges were cut from where. That will help you when you put them back together (butt them up and stich them by hand or zigzag, never overlapping.)
You want to pin it well through the center then roll the front and back out of the way and cut the batting. Be very careful not to cut the front or back!!!
Then when you do the sides, the center is stable because it is already quilted and you pin/baste the first side.
#17
Originally Posted by np3
Since I can't find the tute, I am looking thorough my magazines. If I get the name of the technique, we will be able to find it. It is the best method for something this large.
Nancy
Nancy
:-)
#19
Power Poster
Join Date: May 2010
Location: Bakersfield, CA
Posts: 13,214
Originally Posted by Fancy Nancy
i have quilted several large quilts in 2 or 3 sections and they came out fine. was much easier to handle and not so frustrating trying to shove so much thru the machine opening.
Can you remember the name of the technique? I am having trouble finding it!!
#20
Originally Posted by np3
Originally Posted by Fancy Nancy
i have quilted several large quilts in 2 or 3 sections and they came out fine. was much easier to handle and not so frustrating trying to shove so much thru the machine opening.
Can you remember the name of the technique? I am having trouble finding it!!
Thread
Thread Starter
Forum
Replies
Last Post
QuilterMomOf3
Main
26
03-30-2013 04:15 AM