Why a scant 1/4 seam?
#1
Junior Member
Thread Starter
Join Date: Mar 2011
Posts: 199
Why a scant 1/4 seam?
Our quilt club had someone come in this weekend and teach us how to do a bargello. We did a table topper from one of Eileen Wrights books and the directions said to do a scant 1/4 seam. I know that you need to do this on some blocks to make them come out to the right size, but why on a bargello? If you did a true quarter wouldn't it still come out the same?
#2
I got one of her bargello books with the tablerunner in it. It is excellent at telling the reader everything possible so you will be successful. I think Bargello quilts with all the pieces has to have precision. I love the book a lot. The Bargello Tablerunner has some very small pieces in it, also.
#3
Super Member
Join Date: Mar 2011
Location: Central NJ
Posts: 5,572
In most cases I think consistency is far more important. If you are following a specific pattern with incredibly precise cutting directions I think it's probably critical. Otherwise I think consistency is far more important and relevant.
#4
Power Poster
Join Date: Mar 2011
Location: Ontario, Canada
Posts: 41,548
I would think that the scant 1/4 might be because of all the pieces. Even a tiny bit extra in the seam allowance will increase over time. I think if the pattern is woven, then any shifting will effect the intersections. If the bargello is like Surf Song, I can't see the seam allowances making any difference in the pattern.
#6
Power Poster
Join Date: May 2008
Location: MN
Posts: 24,666
In my mind, the "scant" quarter inch is about one thread less than an " actual" quarter inch.
I think the reason the instructions say " scant" is so that the seam is no more than a quater inch.
For some of us that used to sew garments that called for a 5/8 inch seam allowance, it was a major adjustment to sew that skimpy 1/4 inch seam.
I think the reason the instructions say " scant" is so that the seam is no more than a quater inch.
For some of us that used to sew garments that called for a 5/8 inch seam allowance, it was a major adjustment to sew that skimpy 1/4 inch seam.
#7
Senior Member
Join Date: Oct 2014
Posts: 390
Maybe I am missing something here, but I thought a scant quarter inch seam was to make up for the thickness of the thread so that the piece or block would be the right size. The seam should be sized so that the piece or block is the exact size of the pattern after it is pressed.
#8
Power Poster
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
Maybe I am missing something here, but I thought a scant quarter inch seam was to make up for the thickness of the thread so that the piece or block would be the right size. The seam should be sized so that the piece or block is the exact size of the pattern after it is pressed.
#9
Power Poster
Join Date: Feb 2009
Location: Northern Michigan
Posts: 12,861
As PaperPieces stated, the finish is the important part. Using a scant 1/4" seam allows for the thread and fold so your block/ item turns out the size its supposed to be. Especially important with blocks/quilts that have many, many seams ( like bargello). With a pattern like a bargello having even an extra 16 th of an inch adds ( subtracts) a whole inch in finished size in 16 strips/seams. Those little bits add up.
#10
Power Poster
Join Date: Jun 2011
Location: Southern California
Posts: 19,127
I have done numerous bargellos from Eileen's two books and I don't recall any required scant 1/4" seam. She does have some skinny unfinished seam down to 1" but it is only when you try to do 3/4" width strip that it is best to stitch those seams a little skinny. I also press my seams away from the thinnest strip to avoid any bulk problem with my seams. I have changed patterns and no long cut any bargello strip less than an 1" wide. It is just not worth working with that narrow of a strip. Usually I have seen that a skinny 1/4" suggested with very tiny miniature blocks. Here is Eileen's table runner pattern from her first book that I made for a friend. I also made one in Xmas fabrics for another friend.
Last edited by ManiacQuilter2; 04-17-2015 at 04:01 AM.
Thread
Thread Starter
Forum
Replies
Last Post