Your experience and opinion please
10-07-2016, 01:33 PM
#1
Super Member
Thread Starter
Join Date: Jan 2011
Posts: 3,198
Your experience and opinion please
Opened a kit, sorted fabrics and read and reread the pattern. I need some help though before I start cutting. The pattern instructions are confusing and no final measurements of the units were given so I emailed the pattern/kit designer- no response yet. I need to make HSTs and I only know the method where you draw line diagonally, sew to each side and trim up. I finally figured out from the rereading that the size of the HST need to be 1 7/8". I think I can use a 2 3/4" square of each fabric and get two HSTs. But I did see this method where you get 8 units at a time. Has anyone used this: https://www.craftsy.com/blog/2014/01...are-triangles/
Your help will be greatly appreciated as the amount of fabric in this kit is not as generous as most I have purchased.
Thanks!
Your help will be greatly appreciated as the amount of fabric in this kit is not as generous as most I have purchased.
Thanks!
10-07-2016, 02:21 PM
#2
Super Member
Join Date: Jul 2014
Location: Illinois
Posts: 2,140
If the finished size is 1 7/8" on each of the short sides, then to do the Magic 8 HST's, you'll need to cut each square at 5.5", and that will yield 8 triangles.
If the unfinished size is 1 7/8" (meaning the finished size is 1 5/8"), then the Magic 8 square should be 5".
Yes, I have used that method. It is very good as long as you cut your squares to the proper size & with the grain of the fabric. The downside, obviously, is that is your Magic 8 square is off by a bit, all 8 pieces will be the wrong size. And if you stack your fabric & mis-cut a few squares at once, the problem is multiplied. So ... moral of the story is: measure carefully!
If the unfinished size is 1 7/8" (meaning the finished size is 1 5/8"), then the Magic 8 square should be 5".
Yes, I have used that method. It is very good as long as you cut your squares to the proper size & with the grain of the fabric. The downside, obviously, is that is your Magic 8 square is off by a bit, all 8 pieces will be the wrong size. And if you stack your fabric & mis-cut a few squares at once, the problem is multiplied. So ... moral of the story is: measure carefully!
10-07-2016, 06:42 PM
#5
Super Member
Join Date: Jul 2012
Location: Morris Plains, NJ
Posts: 1,803
I love the Magic 8 but I learned it on Lynn Wilder's website, sewn wild oaks, and her formula is to add 1" to the finished size HST and multiply by 2 to get the size of the 2 large squares to start with. It is a great site with lots of pictures. I made Lady of the Lake with 700 + HST and this method was great. After I got done with making all of these, I bought the Blocloc HST template. I highly recommend their templates. I have several HST and Flying Geese templates and they make it so easy.
10-07-2016, 07:12 PM
#6
Super Member
Join Date: Jul 2014
Location: Illinois
Posts: 2,140
See edits below.
If the finished size is 1 7/8" on each of the short sides, then to do the Magic 8 HST's, you'll need to cut each square at 5.5", and that will yield 8 triangles.
If the unfinished size is 1 7/8" (meaning the finished size is EDIT: 1 3/8"), then the Magic 8 square should be EDIT: 4.5".
Yes, I have used that method. It is very good as long as you cut your squares to the proper size & with the grain of the fabric. The downside, obviously, is that is your Magic 8 square is off by a bit, all 8 pieces will be the wrong size. And if you stack your fabric & mis-cut a few squares at once, the problem is multiplied. So ... moral of the story is: measure carefully!
If the unfinished size is 1 7/8" (meaning the finished size is EDIT: 1 3/8"), then the Magic 8 square should be EDIT: 4.5".
Yes, I have used that method. It is very good as long as you cut your squares to the proper size & with the grain of the fabric. The downside, obviously, is that is your Magic 8 square is off by a bit, all 8 pieces will be the wrong size. And if you stack your fabric & mis-cut a few squares at once, the problem is multiplied. So ... moral of the story is: measure carefully!
10-08-2016, 05:04 AM
#7
Super Member
Thread Starter
Join Date: Jan 2011
Posts: 3,198
Kit came from Farmhouse Threads, Sewing Room Sampler. Their instructions were for only one method which was to cut squares, then cut diagonally twice and then sew units together forming the HST. There would be tiny triangles to sew together AGH! So I was looking for a better method and how to calculate the measurement to be successful. I did use Bree123 calculations and scrap fabric to make a prototype. Worked fine but I did have to trim a smidgen so I will give her EDITED dimensions a try later today. Thanks so much everyone!!!
10-08-2016, 12:11 PM
#9
Super Member
Join Date: Jun 2010
Location: The Deep South near Cajun Country, USA
Posts: 5,429
Kit came from Farmhouse Threads, Sewing Room Sampler. Their instructions were for only one method which was to cut squares, then cut diagonally twice and then sew units together forming the HST. There would be tiny triangles to sew together AGH! So I was looking for a better method and how to calculate the measurement to be successful. I did use Bree123 calculations and scrap fabric to make a prototype. Worked fine but I did have to trim a smidgen so I will give her EDITED dimensions a try later today. Thanks so much everyone!!!
10-09-2016, 04:39 PM
#10
Senior Member
Join Date: Apr 2011
Location: N. Atlanta, GA
Posts: 805
About 3 years ago, I bought a software program called Triangulations...https://www.amazon.com/Bear-Paw-Tria.../dp/1936207168 and I've never looked back. No matter what the finished size is I can pull it up, print a page on my computer, sew the fabric to the page, cut it out and it's perfect!! If you think you're going to be quilting for a long time ahead this is one Must Have tool. Good luck with kit!
Thread
Thread Starter
Forum
Replies
Last Post
NoraB
Main
8
05-08-2016 05:17 AM
sewNso
General Chit-Chat (non-quilting talk)
27
05-07-2013 06:06 PM
SewExtremeSeams
Main
4
09-14-2012 02:45 PM
